Biblio

Filters: Keyword is invertors  [Clear All Filters]
2021-02-08
Liu, S., Kosuru, R., Mugombozi, C. F..  2020.  A Moving Target Approach for Securing Secondary Frequency Control in Microgrids. 2020 IEEE Canadian Conference on Electrical and Computer Engineering (CCECE). :1–6.
Microgrids' dependency on communication links exposes the control systems to cyber attack threats. In this work, instead of designing reactive defense approaches, a proacitve moving target defense mechanism is proposed for securing microgrid secondary frequency control from denial of service (DoS) attack. The sensor data is transmitted by following a Markov process, not in a deterministic way. This uncertainty will increase the difficulty for attacker's decision making and thus significantly reduce the attack space. As the system parameters are constantly changing, a gain scheduling based secondary frequency controller is designed to sustain the system performance. Case studies of a microgrid with four inverter-based DGs show the proposed moving target mechanism can enhance the resiliency of the microgrid control systems against DoS attacks.
2020-02-17
Leite, Leonardo H. M., do Couto Boaventura, Wallace, de Errico, Luciano, Machado Alessi, Pedro.  2019.  Self-Healing in Distribution Grids Supported by Photovoltaic Dispersed Generation in a Voltage Regulation Perspective. 2019 IEEE PES Innovative Smart Grid Technologies Conference - Latin America (ISGT Latin America). :1–6.
Distributed Generation Photovoltaic Systems -DGPV - connected to the power distribution grid through electronic inverters can contribute, in an aggregate scenario, to the performance of several power system control functions, notably in self-healing and voltage regulation along a distribution feeder. This paper proposes the use of an optimization method for voltage regulation, focused on reactive power injection control, based on a comprehensive architecture model that coordinates multiple photovoltaic distributed sources to support grid reconfiguration after self-healing action. A sensitivity analysis regarding the performance of voltage regulation, based on a co-simulation of PSCAD and MatLab, shows the effectiveness of using dispersed generation sources to assist grid reconfiguration after disturbances caused by severe faults.
2020-11-30
Chen, Z., Bai, B., Chen, D., Chai, W..  2018.  Direct-Current and Alternate-Decay-Current Hybrid Integrative Power Supplies Design Applied to DC Bias Treatment. IEEE Transactions on Power Electronics. 33:10251–10264.
This paper proposes a novel kind of direct-current and alternate-decay-current hybrid integrative magnetization and demagnetization power supplies applied to transformer dc bias treatment based on a nanocomposite magnetic material. First, according to the single-phase transformer structure, one dc bias magnetic compensation mechanism was provided. The dc bias flux in the transformer main core could be eliminated directionally by utilizing the material remanence. Second, for the rapid response characteristic of the magnetic material to an external magnetic field, one positive and negative dc magnetization superimposed decaying ac demagnetization hybrid integrative power supplies based on single-phase rectifier circuit and inverter circuit was designed. In order to accurately control the magnetic field strength by which a good de/-magnetization effect could be achieved, this paper adopts the double-loop control technology of the magnetic field strength and magnetizing current for the nanocomposite magnetic state adjustment. Finally, two 10 kVA transformers and the experiment module of the hybrid integrative power supplies were manufactured and built. Experimental results showed that the integrated power supplies have good de/-magnetization effect and practicability, proving the validity and feasibility of the proposed scheme.
2020-04-24
Makhoul, Rawad, Maynard, Xavier, Perichon, Pierre, Frey, David, Jeannin, Pierre-Olivier, Lembeye, Yves.  2018.  A Novel Self Oscillating Class Phi2 Inverter Topology. 2018 2nd European Conference on Electrical Engineering and Computer Science (EECS). :7—10.

The class φ2 is a single transistor, fast transient inverter topology often associated with power conversion at very high frequency (VHF: 30MHz-300MHz). At VHF, gate drivers available on the market fail to provide the adequate transistor switching signal. Hence, there is a need for new power topologies that do no make use of gate drivers but are still suitable for power conversion at VHF. In This paper, we introduce a new class φ;2 topology that incorporates an oscillator, which takes the drain signal through a feedback circuit in order to force the transistor switching. A design methodology is provided and a 1MHz 20V input prototype is built in order to validate the topology behaviour.

2017-12-04
Gonzalez, A. G., Millinger, J., Soulard, J..  2016.  Magnet losses in inverter-fed two-pole PM machines. 2016 XXII International Conference on Electrical Machines (ICEM). :1854–1860.

This article deals with the estimation of magnet losses in a permanent-magnet motor inserted in a nut-runner. This type of machine has interesting features such as being two-pole, slot-less and running at a high speed (30000 rpm). Two analytical models were chosen from the literature. A numerical estimation of the losses with 2D Finite Element Method was carried out. A detailed investigation of the effect of simulation settings (e.g., mesh size, time-step, remanence flux density in the magnet, superposition of the losses, etc.) was performed. Finally, calculation of losses with 3D-FEM were also run in order to compare the calculated losses with both analytical and 2D-FEM results. The estimation of the losses focuses on a range of frequencies between 10 and 100 kHz.

2015-05-06
Nikolic, G., Nikolic, T., Petrovic, B..  2014.  Using adaptive filtering in single-phase grid-connected system. Microelectronics Proceedings - MIEL 2014, 2014 29th International Conference on. :417-420.

Recently, there has been a pronounced increase of interest in the field of renewable energy. In this area power inverters are crucial building blocks in a segment of energy converters, since they change direct current (DC) to alternating current (AC). Grid connected power inverters should operate in synchronism with the grid voltage. In this paper, the structure of a power system based on adaptive filtering is described. The main purpose of the adaptive filter is to adapt the output signal of the inverter to the corresponding load and/or grid signal. By involving adaptive filtering the response time decreases and quality of power delivery to the load or grid increases. A comparative analysis which relates to power system operation without and with adaptive filtering is given. In addition, the impact of variable impedance of load on quality of delivered power is considered. Results which relates to total harmonic distortion (THD) factor are obtained by Matlab/Simulink software.