Visible to the public CfP: 16th International Conference on Informatics in Control, Automation and Robotics (ICINCO)Conflict Detection Enabled

No replies
Anonymous's picture


16th International Conference on Informatics in Control, Automation and Robotics (ICINCO)

July 29-31, 2019 | Prague, Czech Republic |

Important Dates


Regular Papers

  • Paper Submission: February 28, 2019
  • Authors Notification: May 2, 2019
  • Camera Ready and Registration: May 16, 2019

Position Papers

  • Paper Submission: April 15, 2019
  • Authors Notification: May 23, 2019
  • Camera Ready and Registration: June 5, 2019

Workshop Proposal: March 18, 2019

Doctoral Consortium

  • Paper Submission: June 3, 2019
  • Authors Notification: June 17, 2019
  • Camera Ready and Registration: June 26, 2019

Special Sessions

  • Special Session Proposal: March 18, 2019
  • Paper Submission: May 28, 2019
  • Authors Notification: June 12, 2019
  • Camera Ready and Registration: June 21, 2019


  • Tutorial Proposal: June 12, 2019
  • Demo Proposal: June 12, 2019
  • Panel Proposal: June 12, 2019

Open Communications

  • Paper Submission: June 3, 2019
  • Authors Notification: June 17, 2019
  • Camera Ready and Registration: June 26, 2019

The purpose of the 16th International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.

Informatics applications are pervasive in many areas of Control, Automation and Robotics; This conference intends to emphasize this connection, therefore, authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.

Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.


Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

  1. Intelligent Control Systems and Optimization
  2. Robotics and Automation
  3. Signal Processing, Sensors, Systems Modelling and Control
  4. Industrial Informatics


  • Decision Support Systems
  • Distributed Control Systems
  • Engineering Applications on Intelligent Control Systems and Optimization
  • Evolutionary Computation and Control
  • Fuzzy Control
  • Genetic Algorithms
  • Hybrid Learning Systems
  • Intelligent Fault Detection, Diagnosis and Prognostics
  • Knowledge-Based Systems Applications
  • Machine Learning in Control Applications
  • Neural Networks Based Control Systems
  • Optimization Algorithms
  • Planning and Scheduling
  • Soft Computing
  • Software Agents for Intelligent Control Systems


  • Autonomous Agents
  • Cognitive Approach for Robotics
  • Collective and Social Robots
  • Control and Supervision Systems
  • Engineering Applications on Robotics and Automation
  • Guidance, Navigation and Control
  • Human-Machine Interfaces
  • Humanoid Robots
  • Human-Robots Interfaces
  • Image Processing
  • Industrial Networks and Automation
  • Intelligent Transportation Technologies and Systems
  • Mechatronics Systems
  • Mobile Robots and Intelligent Autonomous Systems
  • Modelling, Simulation and Architecture
  • Network Robotics
  • Perception and Awareness
  • Robot Design, Development and Control
  • Space and Underwater Robots
  • Surveillance, Fault Detection and Diagnosis
  • Telerobotics and Teleoperation
  • Vehicle Control Applications
  • Virtual Environment, Virtual and Augmented Reality
  • Vision, Recognition and Reconstruction


  • Adaptive Signal Processing and Control
  • Biological Inspired Sensors
  • Computer and Microprocessor-Based Control
  • Defect and Change Detection and Identification
  • Engineering Applications
  • Environmental Monitoring and Control
  • Information-Based Models for Control
  • Intelligent Components for Control
  • Mechanical, Force and Tactile Sensors
  • Modelling, Analysis and Control of Discrete-Event Systems
  • Modelling, Analysis and Control of Hybrid Dynamical Systems
  • Nonlinear Signals and Systems
  • Optimization Problems in Signal Processing
  • Real-Time Systems Control
  • Sensors Fusion
  • Signal Reconstruction
  • System Identification
  • System Modelling
  • Time-Frequency Analysis


  • Computer-Based Manufacturing Technologies
  • Energy Efficiency and Green Manufacturing
  • Human Factors & Human-System Interface
  • Industrial Automation and Robotics
  • Industrial Internet of Things
  • Intelligent Design and Manufacturing
  • Manufacturing Systems Engineering
  • Performance Evaluation and Optimization
  • Precision Engineering
  • Production Planning, Scheduling and Control
  • Production Tasks' Design, Planning and Management
  • Quality Control and Management
  • Resources and Knowledge Management in Industry
  • Supply Chain and Logistics Engineering
  • Systems Modelling and Simulation


Dimitar Filev, Research & Advanced Engineering, Ford Motor Company, United States
Ali Zolghadri, University of Bordeaux - CNRS, France


Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors' personal details, the acknowledgments section of the paper and any other reference that may disclose the authors' identity.

Only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarismthoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

Authors can submit their work in the form of a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas. All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.


All accepted papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
SCITEPRESS is a member of CrossRef ( and every paper on our digital library is given a DOI (Digital Object Identifier).
The proceedings will be submitted for indexation by Thomson Reuters Conference Proceedings Citation Index (CPCI/ISI), DBLP, EI (Elsevier Engineering Village Index), Scopus, Semantic Scholar and Google Scholar.


ICINCO Secretariat
Address: Avenida de Sao Francisco Xavier Lote 7L Cave
2900-616 Setubal - Portugal
Tel.: +351 265 520 185
Fax: +351 265 520 186


The conference will be held at the Vienna House Diplomat Prague, Prague, Czech Republic.

The Vienna House Diplomat Prague is located in the diplomatic district, close to the historic centre. Where better to meet and enjoy the good life than where diplomacy prevails? The hotel is one of the most popular conference venues and the views over the rooftops alone make a visit worthwhile. From the wellness area the Castle seem within one's grasp.


Kurosh Madani, University of Paris-EST Creteil (UPEC), France
Janan Zaytoon, University of Reims Champagne Ardennes, France


Oleg Gusikhin, Ford Motor Company, United States


Hussein Abdullah, University of Guelph, Canada
Samir Aberkane, Centre de Recherche en Automatique de Nancy (CRAN), France
Ghassan Abu-Lebdeh, American University of Sharjah, United Arab Emirates
Andrew Adamatzky, University of the West of England, United Kingdom
El-Houssaine Aghezzaf, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre, University of Granada, Spain
Qingsong Ai, Wuhan University of Technology, China
Adel Al-Jumaily, University of Technology Sydney, Australia
Yacine Amirat, University Paris Est Creteil (UPEC), France
Mihail Antchev, Technical University - Sofia, Bulgaria
Rui Araujo, University of Coimbra, Portugal
T. Asokan, Indian Institute of Technology Madras, India
Mohamed Atoui, University of Angers, France
Alfonso Banos, Universidad de Murcia, Spain
Guilherme Barreto, Universidade Federal do Ceara, Brazil
Dennis Barrios-Aranibar, Universidad Catolica San Pablo, Peru
Marcelo Becker, Escola de Engenharia de Sao Carlos, Brazil
Laxmidhar Behera, Indian Institute of Technology, Kanpur, India
Carsten Behn, Merseburg University of Applied Sciences, Germany
Faiz Ben Amar, Universite Pierre et Marie Curie, Institut Systemes Intelligents et de Robotique, France
Lyes Benyoucef, Aix-Marseille University, France
Karsten Berns, University of Kaiserslautern, Germany
Arijit Bhattacharya, University of East Anglia, United Kingdom
Reinaldo Bianchi, Centro Universitario da FEI, Brazil
Mauro Birattari, Universite Libre de Bruxelles, Belgium
Jean-Louis Boimond, ISTIA - LARIS, France
Magnus Boman, The Royal Institute of Technology, Sweden
Glen Bright, University of KwaZulu-Natal, South Africa
Marvin Bugeja, University of Malta, Malta
Kevin Burn, University of Sunderland, United Kingdom
Fernando Caballero, University of Seville, Spain
Kenneth Camilleri, University of Malta, Malta
Angelo Cangelosi, University of Plymouth, United Kingdom
Giuseppe Carbone, Sheffield Hallam University, United Kingdom
Alessandro Casavola, University of Calabria, Italy
Riccardo Cassinis, University of Brescia, Italy
Marco Castellani, University of Birmingham, United Kingdom
Jaime Cerda, Universidad Michoacana de San Nicolas de Hidalgo, Mexico
Kuo-Ming Chang, National Kaohsiung University of Applied Sciences, Taiwan
Yuh-Min Chen, National Cheng Kung University, Taiwan
Albert Cheng, University of Houston, United States
Sung-Bae Cho, Yonsei University, Korea, Republic of
Ryszard Choras, UTP University of Sciences and Technology, Poland
Paul Christodoulides, Cyprus University of Technology, Cyprus
Feng Chu, University of Evry Val d'Essonne, France
Chengbin Chu, ESIEE Paris, Universite Paris-Est, France
Daisuke Chugo, Kwansei Gakuin University, Japan
Juan Cockburn, Rochester Institute of Technology, United States
James Conrad, University of North Carolina at Charlotte, United States
Yechiel Crispin, Embry-riddle Aeronautical University, United States
Jose Cunha, University of Tras-os-montes and Alto Douro, Portugal
Prithviraj Dasgupta, University of Nebraska, United States
Mariolino De Cecco, Universita Di Trento, Italy
Angel Del Pobil, Universitat Jaume I, Spain
Kyriakos Deliparaschos, Cyprus University of Technology, Cyprus
Mingcong Deng, Tokyo University of Agriculture and Technology, Japan
Paolo Di Giamberardino, Sapienza University of Rome, Italy
Alexandre Dolgui, IMT Atlantique, France
Hans Doran, Zurich University of Applied Sciences, Switzerland
Antonio Dourado, University of Coimbra, Portugal
Vasile Dragan, Romanian Academy, Romania
Venky Dubey, Bournemouth University, United Kingdom
Ioan Dumitrache, University "POLITEHNICA" of Bucharest, Romania
Richard J. Duro, Universidade Da Coruna, Spain
Marc Ebner, Ernst-Moritz-Arndt-Universitat Greifswald, Germany
Petr Ekel, Pontifical Catholic University of Minas Gerais, Brazil
Mohammed El-Abd, American University of Kuwait, Kuwait
Ashraf Elnagar, University of Sharjah, United Arab Emirates
Ali Eydgahi, Eastern Michigan University, United States
Simon Fabri, University of Malta, Malta
Christophe Farges, Bordeaux University, IMS - UMR 5218 CNRS, France
Luca Ferrarini, Politecnico di Milano, Italy
Paolo Fiorini, University of Verona, Italy
Juan Flores, University of Michoacan, Mexico
Mauro Franceschelli, Universita di Cagliari, Italy
Georg Frey, Saarland University, Germany
Toyomi Fujita, Tohoku Institute of Technology, Japan
Toshio Fukuda, Nagoya University, Japan
Takeshi Furuhashi, Nagoya University, Japan
Mauro Gaggero, National Research Council of Italy, Italy
John Gan, University of Essex, United Kingdom
Ivan Garcia Daza, University of Alcala, Spain
Maria Garcia-Planas, Universitat Politecnica de Catalunya, Spain
Len Gelman, Cranfield University, United Kingdom
Paulo Gil, Universidade Nova de Lisboa, Portugal
Giuseppina Gini, Politecnico di Milano, Italy
Adriana Giret, Polytechnic University of Valencia, Spain
Arthur Gomez, Universidade do Vale do Rio dos Sinos, Brazil
Amr Goneid, The American University in Cairo, Egypt
Irene Gregory, NASA Langley Research Center, United States
Lucian Grigorie, Military Technical Academy ''Ferdinand I'', Bucharest, Romania
Lech Grzesiak, Warsaw University of Technology, Poland
Jan Haase, Helmut Schmidt University of the Federal Armed Forces Hamburg, Germany
Maki Habib, The American University in Cairo, Egypt
Jorg Hahner, Universitat Augsburg, Germany
Kensuke Harada, Osaka University, Japan
Jennifer Harding, Loughborough University, United Kingdom
Noelia Henrandez Parra, Universidad de Alcala, Spain
Arturo Hernandez - Aguirre, Centre for Research in Mathematics, Mexico
Suranga Hettiarachchi, Indiana University Southeast, United States
Diana Hintea, Coventry University, United Kingdom
Yasuhisa Hirata, Tohoku University, Japan
Wladyslaw Homenda, Warsaw University of Technology, Poland
Naira Hovakimyan, University of Illinois at Urbana-Champaign, United States
Jonathan How, Massachusetts Institute of Technology, United States
Yisheng Huang, Nat. Ilan Univ., Taiwan
Daniela Iacoviello, Sapienza University of Rome, Italy
Koji Ikuta, University of Tokyo, Japan
Atsushi Imiya, IMIT Chiba University, Japan
Gianluca Ippoliti, Universita Politecnica delle Marche, Italy
Dmitry Ivanov, Berlin School of Economics and Law, Germany
Sarangapani Jagannathan, Missouri University of Science and Technology, United States
Gerrit Janssens, Hasselt University, Belgium
Thira Jearsiripongkul, Thammasat University, Thailand
Michael Jenkin, York University, Canada
Wootae Jeong, Korea Railroad Research Institute, Korea, Republic of
Myong Jeong, Rutgers University, United States
Isabel Jesus, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Marcio Jose da Cunha, Federal University of Uberlandia, Brazil
Marc Jungers, CNRS - Universite de Lorraine, France
Fabricio Junqueira, University of Sao Paulo (USP), Brazil
Michail Kalogiannakis, University of Crete, Greece
Parminder Kang, De Montfot University, United Kingdom
Tohru Kawabe, University of Tsukuba, Japan
Rafael Kelly, CICESE Research Center, Mexico
Jonghwa Kim, University of Science & Technology, Korea, Republic of
DaeEun Kim, Yonsei University, Korea, Republic of
Waree Kongprawechnon, Thammasat University, Thailand
Krzysztof Kozlowski, Poznan University of Technology, Poland
Ondrej Krejcar, University of Hradec Kralove, Czech Republic
Masao Kubo, Narional Defense Academy of Japan, Japan
Kolja Kuhnlenz, Coburg University of Applied Sciences ans Arts, Germany
Nikolay Kuznetsov, Saint-Petersburg State University, Russian Federation
Halina Kwasnicka, Wroclaw University of Technology, Poland
Dong-Soo Kwon, KAIST, Korea, Republic of
Sebastien Lahaye, Istia - LARIS, France
H. Lam, King's College London, United Kingdom
Jose Lastra, Tampere University of Technology, FAST Laboratory, Finland
Jimmy Lauber, University of Valenciennes, France
Jangmyung Lee, Pusan Nat'l Univ., Korea, Republic of
Dimitri Lefebvre, Greah Universite Le Havre, France
Kauko Leiviska, University of Oulu, Finland
Roland Lenain, Irstea, France
Fabrizio Leonardi, FEI University, Brazil
Rory Lewis, University of Colorado, United States
Yangmin Li, The Hong Kong Polytechnic University, Hong Kong
Christos Liambas, Aristotle University of Thessaloniki, Greece
Gordon Lightbody, University College Cork, Ireland
Veronique Limere, Ghent University, Belgium
Huei-Yung Lin, National Chung Cheng University, Taiwan
Kai Liu, The University of Liverpool, United Kingdom
Niels Lohse, Loughborough University, United Kingdom
Sergio Lopes, University of Minho, Portugal
Antonio Lopes, University of Porto, Portugal
Gonzalo Lopez-Nicolas, Universidad de Zaragoza, Spain
Ping Lou, Wuhan University of Technology, China
Yu-Shen Lu, National Taiwan Normal University, Taiwan
Martin Lukac, Nazarbayev University, Kazakhstan
Damian Lyons, Fordham University, United States
Danilo Maccio, National Research Council of Italy, Italy
Jose Machado, Institute of Engineering, Polytechnic of Porto, Portugal
Douglas Macharet, Universidade Federal De Minas Gerais, Brazil
Anthony Maciejewski, Colorado State University, United States
Ana Madureira, ISEP/IPP, Portugal
Magdi Mahmoud, King Fahd University of Petroleum and Minerals, Saudi Arabia
Frederic Maire, Queensland University of Technology, Australia
Om Malik, University of Calgary, Canada
Konrad Markowski, Warsaw University of Technology, Poland
Tariq Masood, University of Cambridge, United Kingdom
Alicja Mazur, Wroclaw University of Technology, Poland
Ross McAree, University of Queensland, Australia
Sean McLoone, Queen's Unviersity Belfast, Ireland
Joaquim Melendez, University of Girona, Spain
Nadhir Messai, CReSTIC, France
Konstantinos Michail, Cyprus University of Technology, Cyprus
Agnieszka Miguel, Seattle University, United States
Masoud Mohammadian, University of Canberra, Australia
S. Moosavian, K. N. Toosi Univ. of Technology, Iran, Islamic Republic of
Vladimir Mostyn, VSB - Technical University of Ostrava, Czech Republic
Vassilis Moulianitis, University of the Aegean, Greece
George Moustris, National Technical University of Athens, Greece
Saeid Nahavandi, Deakin University, Australia
Cairo Nascimento Junior, Instituto Tecnologico de Aeronautica, Brazil
Andreas Nearchou, University of Patras, Greece
Juan J. Nieto, University of Santiago de Compostela, Spain
George Nikolakopoulos, Lulea University of Technology, Sweden
Ivan Nunes da Silva, Universidade de Sao Paulo, Brazil
Fernando Osorio, USP - Universidade de Sao Paulo, Brazil
Sanjeevikumar Padmanaban, University of Johannesburg, South Africa
Ju H. Park, Yeungnam University, Korea, Republic of
Igor Paromtchik, INRIA, France
Ignacio Parra-Alonso, University of Alcala, Spain
Pushparaj Pathak, Indian Institute of Technology, India
Pierre Payeur, University of Ottawa, Canada
Qingjin Peng, University of Manitoba, Canada
Fernando Pereira, University of Porto, Portugal
D. Pham, The University of Birmingham, United Kingdom
S. Ponnambalam, University Malaysia Pahang, Malaysia
Nirvana Popescu, University Politehnica of Bucharest, Romania
Raul Marin Prades, Jaume I University, Spain
Radu-Emil Precup, Politehnica University of Timisoara, Romania
Libor Preucil, Czech Technical University in Prague, Czech Republic
Fei Qiao, Tongji Univ., China
Jose Ragot, Centre de Recherche en Automatique de Nancy, France
Oscar Reinoso, Miguel Hernandez University, Spain
Mihailo Ristic, Imperial College London, United Kingdom
Juha Roning, University of Oulu, Finland
Hubert Roth, University Siegen, Germany
Antonio Ruano, University of Algarve, Portugal
Jocelyn Sabatier, IMS Laboratory - Bordeaux University, France
Christophe Sabourin, IUT Senart, University Paris-Est Creteil (UPEC), France
Mehmet Sahinkaya, Kingston University London, United Kingdom
Priti Sajja, Sardar Patel University, India
Antonio Sala, Universidad Politecnica de Valencia, Spain
Abdel-Badeeh Salem, Ain Shams University, Egypt
Mohammed Sami, University of Nevada, United States
Roberto Sanchis Llopis, Universitat Jaume I, Spain
Marcello Sanguineti, University of Genoa, Italy
Jurek Sasiadek, Carleton University, Canada
Hideyuki Sawada, Waseda University, Japan
Daniel Schmidt, SEW EURODRIVE GmbH, Germany
Gerhard Schweitzer, ETH Zurich, Switzerland
Andre Gustavo Scolari Conceicao, Federal University of Bahia, Brazil
Joao Sequeira, Instituto Superior Tecnico, Portugal
Roman Sergienko, riskmethods GmbH, Germany
Madhavan Shanmugavel, Monash University, Malaysia
Jinhua She, Tokyo University of Technology, Japan
Michael Short, Teesside University, United Kingdom
Manuel Silva, ISEP-Instituto Superior de Engenharia do Porto, Portugal
Carlos Silvestre, University of Macau, China, and Instituto Superior Tecnico, Universidade de Lisboa, Portugal, China
Vasile Sima, National Institute for Research & Development in Informatics, Romania
Dan Simon, Cleveland State University, United States
Daniel Simon, INRIA, France
Arpita Sinha, IIT Bombay, India
Adam Slowik, Koszalin University of Technology, Poland
Andrzej Sluzek, Khalifa University, United Arab Emirates
Burkhard Stadlmann, Upper Austria University of Applied Sciences, Wels, Austria
Olaf Stursberg, University of Kassel, Germany
Raul Suarez, Universitat Politecnica de Catalunya (UPC), Spain
Kamesh Subbarao, University of Texas at Arlington, United States
Katia Sycara, Carnegie Mellon University, United States
Les Sztandera, Jefferson (Philadelphia University + Thomas Jefferson University), United States
Tianhao Tang, Shanghai Maritime University, China
Tomasz Tarczewski, Nicolaus Copernicus University, Poland
Abdelhamid Tayebi, Lakehead University, Canada
Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
Simon Thompson, AIST, Japan
Gui Tian, Newcastle University, United Kingdom
Germano Torres, PS Solutions, Brazil
Wa-Muzemba Tshibangu, Morgan State University, United States
Avgoustos Tsinakos, University of Kavala Institute of Technology / Athabasca University of Canada, Greece
Antonios Tsourdos, Cranfield University, United Kingdom
Ali Turgut, Middle East Technical University, Turkey
Bartlomiej Ufnalski, Warsaw University of Technology, Poland
Gulay Unal, Anadolu University, Turkey
Jose Valente de Oliveira, Universidade do Algarve, Portugal
Roberto Valenti, MathWorks, United States
Angel Valera, Universidad Politecnica de Valencia, Spain
Antonis Vardulakis, Aristotle University of Thessaloniki, Greece
Cesar Vargas-Rosales, Tecnologico de Monterrey, Campus Monterrey, Mexico
Alexandra Velasco, Universidad Militar Nueva Granada, Colombia
Ramiro Velazquez, Universidad Panamericana, Mexico
Hugo Vieira Neto, Federal University of Technology - Parana, Brazil
Arnoud Visser, Universiteit van Amsterdam, Netherlands
Damir Vrancic, Jozef Stefan Institute, Slovenia
Bernardo Wagner, Leibniz Universitat Hannover, Germany
Mattias Wahde, Chalmers University of Technology, Sweden
Axel Walthelm, GmbH, Germany
Feng Wan, University of Macau, Macau
Long Wang, Peking University, China
Jinling Wang, University of New South Wales (UNSW) Australia, Australia
Jingyu Wang, Northwestern Polytechnical University (NPU), China
James Whidborne, Cranfield University, United Kingdom
Warren White, Kansas State University, United States
Min Wu, China University of Geosciences, China
Wenjun Xu, Wuhan University of Technology, China
Farouk Yalaoui, University of Technology of Troyes, France
Qinmin Yang, Zhejiang University, China
Marek Zaremba, Universite du Quebec (UQO), Canada
Massimiliano Zecca, Loughborough University, United Kingdom
Jie Zhang, Univ. of Newcastle, United Kingdom
Primo Zingaretti, Universita Politecnica delle Marche, Italy
Alois Zoitl, Johannes Keppler University, Austria
Loredana Zollo, Universita Campus Bio-Medico, Italy
Argyrios Zolotas, University of Lincoln, United Kingdom

(list not yet complete)