The purpose of the International Conference on Informatics in Control, Automation and Robotics (ICINCO) is to bring together researchers, engineers and practitioners interested in the application of informatics to Control, Automation and Robotics. Four simultaneous tracks will be held, covering Intelligent Control Systems, Optimization, Robotics, Automation, Signal Processing, Sensors, Systems Modelling and Control, and Industrial Informatics.

Authors should highlight the benefits of Information Technology (IT) in these areas. Ideas on how to solve problems using IT, both in R&D and industrial applications, are welcome. Papers describing advanced prototypes, systems, tools and techniques and general survey papers indicating future directions are also encouraged. Papers describing original work are invited in any of the areas listed below. Accepted papers, presented at the conference by one of the authors, will be published in the Proceedings of ICINCO, with an ISBN. Acceptance will be based on quality, relevance and originality. Both full research reports and work-in-progress reports are welcome. There will be both oral and poster sessions.

Special sessions, dedicated to case-studies and commercial presentations, as well as tutorials dedicated to technical/scientific topics are also envisaged: companies interested in presenting their products/methodologies or researchers interested in holding a tutorial, workshop or special session are invited to contact the conference secretariat or visit the conference website.

CONFERENCE AREAS

Each of these topic areas is expanded below but the sub-topics list is not exhaustive. Papers may address one or more of the listed sub-topics, although authors should not feel limited by them. Unlisted but related sub-topics are also acceptable, provided they fit in one of the following main topic areas:

AREA 1: INTELLIGENT CONTROL SYSTEMS AND OPTIMIZATION

Data Based Control
Decision Support Systems
Distributed Control Systems
Engineering Applications on Intelligent Control Systems and Optimization
Evolutionary Computation and Control
Fuzzy Control
Genetic Algorithms
Hybrid Systems
Intelligent Fault Detection, Diagnosis and Prognostics
Knowledge-Based Systems Applications
Mechatronics Systems
Machine Learning in Control Applications
Networked Control
Neural Networks Based Control Systems
Optimization Algorithms
Planning and Scheduling
Soft Computing
Software Agents for Intelligent Control Systems

AREA 2: ROBOTICS AND AUTOMATION

Autonomous Agents
Cognitive Approach for Robotics
Collective and Social Robots
Control and Supervision Systems
Engineering Applications on Robotics and Automation
Guidance, Navigation and Control
Human-Machine Interfaces
Humanoid Robots
Human-Robots Interfaces
Image Processing
Intelligent Transportation Technologies and Systems
Mobile Robots and Intelligent Autonomous Systems
Modelling, Simulation and Architecture
Perception and Awareness
Robot Design, Development and Control
Space and Underwater Robots
Soft Robotics
Surveillance, Fault Detection and Diagnosis
Telerobotics and Teleoperation
Vehicle Control Applications
Virtual Environment, Virtual and Augmented Reality
Vision, Recognition and Reconstruction
Wearable Robotics for Assistance and Rehabilitation
Robots in the Internet of Things

AREA 3: SIGNAL PROCESSING, SENSORS, SYSTEMS MODELLING AND CONTROL

Adaptive Signal Processing and Control
Biologically Inspired Sensors and Controllers
Defect and Change Detection and Identification
Engineering Applications
Information-Based Models for Control
Intelligent Components for Control
Mechanical, Force and Tactile Sensors
Modelling, Analysis and Control of Discrete-Event Systems
Modelling, Analysis and Control of Hybrid Dynamical Systems
Nonlinear Signals and Systems
Optimization Problems in Signal Processing
Processing Biological Signals
Real-Time Systems Control
Sensors Fusion
Signal Reconstruction
System Identification
System Modelling
Time-Frequency Analysis

AREA 4: INDUSTRIAL INFORMATICS

Digital Twins
Energy Efficiency and Green Manufacturing
Human Factors & Human-System Interface
Industrial Networks, Automation and Robotics
Industrial Internet of Things and Sensor Networks
Intelligent Design and Manufacturing
Manufacturing Systems Engineering
Performance Evaluation and Optimization
Precision Engineering
Production Planning, Management and Control
Quality Control and Management
Resources and Knowledge Management in Industry
Supply Chain and Logistics Engineering
Systems Modelling and Simulation

KEYNOTE SPEAKERS

Antonella Ferrara, Dipartimento di Ingegneria Industriale e dell'Informazione, Università degli Studi di Pavia, Italy
John Krumm, Microsoft Research, United States
Vladimír Kučera, Czech Institute of Informatics, Robotics, and Cybernetics, Czech Technical University in Prague, Czech Republic

PAPER SUBMISSION

Authors can submit their work in the form of a complete paper or an abstract, but please note that accepted abstracts are presented but not published in the proceedings of the conference. Complete papers can be submitted as a Regular Paper, representing completed and validated research, or as a Position Paper, portraying a short report of work in progress or an arguable opinion about an issue discussing ideas, facts, situations, methods, procedures or results of scientific research focused on one of the conference topic areas.

Authors should submit a paper in English, carefully checked for correct grammar and spelling, addressing one or several of the conference areas or topics. Each paper should clearly indicate the nature of its technical/scientific contribution, and the problems, domains or environments to which it is applicable. To facilitate the double-blind paper evaluation method, authors are kindly requested to produce and provide the paper WITHOUT any reference to any of the authors, including the authors’ personal details, the acknowledgments section of the paper and any other reference that may disclose the authors’ identity.

When submitting a complete paper please note that only original papers should be submitted. Authors are advised to read INSTICC's ethical norms regarding plagiarism and self-plagiarism thoroughly before submitting and must make sure that their submissions do not substantially overlap work which has been published elsewhere or simultaneously submitted to a journal or another conference with proceedings. Papers that contain any form of plagiarism will be rejected without reviews.

All papers must be submitted through the online submission platform PRIMORIS and should follow the instructions and templates that can be found under Guidelines and Templates. After the paper submission has been successfully completed, authors will receive an automatic confirmation e-mail.

Submit a Paper | Submit an Abstract

PUBLICATIONS

All accepted complete papers will be published in the conference proceedings, under an ISBN reference, on paper and on digital support.
SCITEPRESS is a member of CrossRef (http://www.crossref.org/) and every paper on our digital library is given a DOI (Digital Object Identifier).
The proceedings will be submitted for indexation by SCOPUS, Google Scholar, DBLP, Semantic Scholar, EI and Web of Science / Conference Proceedings Citation Index.

SECRETARIAT

ICINCO Secretariat
Address: Avenida de S. Francisco Xavier, Lote 7 Cv. C
2900-616 Setúbal - Portugal
Tel.: +351 265 520 185
Fax: +351 265 520 186
e-mail: icinco.secretariat@insticc.org
Web: https://icinco.scitevents.org

VENUE

The conference will take place at the Vila Galé Porto hotel which is located in the beautiful and historical city of Porto in Portugal. Porto is considered to be one of the most beautiful historical towns in Portugal, with its remarkable architectural heritage shaped by history.

CONFERENCE CHAIR

Dimitar Filev, Research & Advanced Engineering, Ford Motor Company, United States

PROGRAM CO-CHAIRS

Giuseppina Gini, DEIB, Politecnico di Milano, Italy
Radu-Emil Precup, Department of Automation and Applied Informatics, Politehnica University of Timisoara, Romania

PROGRAM COMMITTEE MEMBERS

Sherif Abdelwahed, Electrical and Computer Engineering, Virginia Commonwealth University, United States
Hussein A. Abdullah, School of Engineering, University of Guelph, Canada
Khalid Abidi, Newcastle University Singapore, Singapore
Mihail Abrudean, Independent Researcher, Romania
Lounis Adouane, Robotics, Université de Technologie de Compiègne, France
El-Houssaine Aghezzaf, Department of Industrial Management, Ghent University, Faculty of Engineering and Architecture, Belgium
Eugenio Aguirre, Department of Computer Science And Artificial Intelligence, University of Granada, Spain
Rudy Agustriyanto, Chemical Engineering, University of Surabaya, Indonesia
Aamir Ahmad, Max Planck Institute for Intelligent Systems, Germany
Mojtaba Ahmadieh Khanesar, Faculty of Engineering, University of Nottingham, United Kingdom
Chuadhry Mujeeb Ahmed, University of Bristol, Singapore
Manuel Aleixandre, Laboratory for Future Interdisciplinary Research of Science and Technology, Institute of Innovative Research, Tokyo Institute of Technology, Japan
Erdinç Altug, Department of Mechanical Engineering, Istanbul Technical University, Turkey
Víctor H. Andaluz, Eléctrica y Electrónica, Universidad de las Fuerzas Armadas ESPE, Ecuador
Mihail H. Antchev, Faculty of electronic engineering and technology, sectionPower electronics, Technical University - Sofia, Bulgaria
Rui Araujo, Department of Electrical and Computer Engineering, University of Coimbra, Portugal
Aluizio R. Araujo, Centro de Informatica, Federal University Pernambuco, Brazil
Laurent Arcese, Independent Researcher, France
Vijayan K. Asari, Electrical and Computer Engineering, University of Dayton, United States
Vijayan K. Asari, Electrical and Computer Engineering, University Dayton, United States
Mohd Ashraf Ahmad, Faculty of Electrical & Electronics Engineering, University Malaysia Pahang, Malaysia
Ralf Bachmayer, MARUM Center for Marine Environmental Sciences, University of Bremen, Germany
Shaoping Bai, Aalborg University, Denmark
Abdulrahman H. Bajodah, King AbdulAziz University, Saudi Arabia
Ramiro Barbosa, Department of Electrotechnical Engineering, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Michele Basso, Information Engineering, University of Florence, Italy
Yazdan Batmani, Faculty of Engineering, University of Kurdistan, Iran, Islamic Republic of
Bernhard Bauer, Institute of Computer Science, University of Augsburg, Germany
Eric Baumgartner, Academics, Milwaukee School of Engineering, United States
Mahmoud Belhocine, Robotics, CDTA, Algeria
Juri Belikov, Software Science, Tallinn University of Technology, Estonia
Dominik Belter, Poznan University of Technology, Poland
Faiz Ben Amar, Sorbonne Université, France
Naceur Benhadj Braiek, Génie Electrique,, Tunisia
Tarun K. Bera, Mechanical Engineering Department, TIET Patiala, India
Karsten Berns, Department Of Computer Science, University of Kaiserslautern-Landau, Germany
Sylvain Bertrand, TIS, ONERA - Univ. Paris-Saclay, France
Arijit Bhattacharya, Norwich Business School, University of East Anglia, United Kingdom
Zafer Bingul, Mechatronics Eng., Kocaeli University, Turkey
Claudia-Adina Bojan-Dragos, Politehnica University of Timisoara, Romania
Sofiane Bououden, Faculty of sciences and technology, University of Khenchela, Algeria
Mohammad Bozorg, Department of Mechanical Engineering, Yazd University, Iran, Islamic Republic of
Jean-François Brethe, Greah, France
Glen Bright, Mechanical Engineering, University of KwaZulu-Natal, South Africa
Duke M. Bulanon, Northwest Nazarene University, United States
Laurent Burlion, MAE, Rutgers, the State University of New Jersey, United States
Ivan Buzurovic, Harvard University, United States
Simeon C. Calvert, Department of Transport & Planning, TU Delft, Netherlands
Kenneth Camilleri, Department of Systems and Control Engineering, University of Malta, Malta
Alessandro Casavola, DIMES, University of Calabria, Italy
Marco Castellani, University of Birmingham, United Kingdom
Jés Cerqueira, Departamento de Engenharia Eletrica e de Computacao, Universidade Federal da Bahia, Brazil
Adrian D. Cheok, i-University, Tokyo, Japan
Nikhil Chopra, University of Maryland, United States
Paul Christodoulides, Cyprus University of Technology, Cyprus
Feng Chu, University of Evry Val d'Essonne, France
Paulo Jorge Coelho, Polytechnic University of Leiria, Portugal
Julian Colorado, Department of Electronics, Pontificia Universidad Javeriana Bogota, Colombia
Sesh Commuri, EBME, University of Nevada, Reno, United States
Michel Dambrine, Polytechnic University of Hauts-de-France, France
Vivek Deshpande, Computer Engineering, Vishwakarma Institute of Technology, India
Paolo Di Giamberardino, Computer, Control and Management Engineering, Sapienza University of Rome, Italy
António Dourado, Informatics Engineering, University of Coimbra, Portugal
Pawel J. Drag, Department of Control Systems and Mechatronics, Wroclaw University of Science and Technology, Poland
Venky Dubey, Design and Engineering, Bournemouth University, United Kingdom
Marc Ebner, Institut für Mathematik und Informatik, Ernst-Moritz-Arndt-Universität Greifswald, Germany
Mehmet Önder Efe, Hacettepe Univ., Turkey
Sebastian Engell, Independent Researcher, Germany
Eniko Enikov, The University of Arizona, United States
Mohammed S. Fadali, Electrical & Biomedical Engineering, UNR, United States
Baris Fidan, Mechanical and Mechatronics Engineering, University of Waterloo, Canada
Alberto Finzi, DIETI, University of Naples Federico II, Italy
Paolo Fiorini, Department of Computer Science, University of Verona, Italy
Gerardo Flores, Systems Engineering Department, University of Texas at Dallas, United States
Fernando Fontes, DEEC, Faculty of Engineering, University of Porto, Portugal
Thierry Fraichard, INRIA, France
Giuseppe Franze', University of Calabria, Italy
Eduardo Oliveira Freire, Federal University of Sergipe, Brazil
Georg Frey, Chair of Automation and Energy Systems, Automation and Energy Systems, Saarland University, Germany
Mauro Gaggero, Institute of Marine Engineering, National Research Council of Italy, Italy
Zoran Gajic, Electrical and Computer Engineering, Rutgers, The State University Of New Jersey, United States
Andrej Gams, Jožef Stefan Institute, Slovenia
Péter Gáspár, Systems and Control Laboratory, SZTAKI, Hungary
Paulo Gil, Electrical Engineering, Universidade Nova de Lisboa, Portugal
Giorgio Gnecco, IMT - School for Advanced Studies - Lucca, Italy
Eduardo P. Godoy, Control and Automation Engineering, São Paulo State University (UNESP), Brazil
Luis Gomes, FCT - Dep. Eng. Electrotécnica, Universidade Nova de Lisboa, Portugal
Gil M. Gonçalves, Faculty of Engineering of the University of Porto, Portugal
Lucian T. Grigorie, Faculty of Aircraft and Military Vehicles, Center for Excellence in Self-Propelled Systems and Technologies for Defense and Security, Military Technical Academy ''Ferdinand I'', Bucharest, Romania
Lech Grzesiak, Electrical Engineering, Warsaw University of Technology, Poland
Prof. Rajeev Gupta, Electronics Engineering, Rajasthan Technical University, India
Mehmet Serdar Güzel, Ankara University, Turkey
Maki Habib, Mechanical Eng. Dept., , The American University in Cairo, Egypt
Edmond Hajrizi, University for Business and Technology, Kosovo
Tarek Hamel, Sophia University, Japan
Kensuke Harada, Graduate School of Engineering Science, Osaka University, Japan
Khalifa H. Harib, Mechanical and Aerospace, UAE University, United Arab Emirates
Sallehuddin Haris, Dept. of Mechanical & Manufacturing Engineering, Universiti Kebangsaan Malaysia, Malaysia
David Hästbacka, Computing Sciences, Tampere University, Finland
Ramdane Hedjar, Computer Engineering Department, King Saud University, Saudi Arabia
Abdollah Homaifar, North Carolina Agricultural and Technical State University, United States
Chiu-Fan Hsieh, National Formosa University, Taiwan, Republic of China
Loulin Huang, Auckland University of Technology, New Zealand
Daniela Iacoviello, Computer Control and Management Engineering Antonio Ruberti, Sapienza University of Rome, Italy
Dalil Ichalal, University of Évry-val d'Essonne - Paris Saclay, France
Gianluca Ippoliti, Dipartimento di Ingegneria dell'Informazione, Università Politecnica delle Marche, Italy
Addie Irawan, Universiti Malaysia Pahang Al-Sultan Abdullah, Malaysia
Sarangapani Jagannathan, Electrical and Computer Engineering, Missouri University of Science and Technology, United States
Mohammad A. Jaradat, American University of Sharjah, United Arab Emirates
Michael Jenkin, EECS, York University, Canada
Isabel Jesus, ISEP-Institute of Engineering of PortoDept. of Electrical Engineering, Rua Dr. Antonio Bernardino de Almeida, 431, ISEP/IPP - School of Engineering, Polytechnic Institute of Porto, Portugal
Nicolas Jouandeau, Paris 8 University, France
Fabrício Junqueira, Depto. of Mechatronics and Mechanical Systems, University of São Paulo (USP), Brazil
Laid Kahloul, LINFI Laboratory, Computer Science Department, Biskra University, Biskra, Algeria, Algeria
Mete Kalyoncu, Department of Mechanical Engineering, Turkey
Tohru Kawabe, Faculty of Engineering, Information and Systems, University of Tsukuba, Japan
Mehrdad Kermani, Electrical and Computer Engineering, University Western Ontario, Canada
Mohamed Khalgui, Computer Science, Xidian University, Germany
Farshad Khorrami, ECE, New York University, United States
Jonghoek Kim, Electrical and Computer Engineering, Hongik University, Korea, Republic of
Balint Kiss, Control Engineering And Information Technology, Budapest University of Technology and Economics, Hungary
Bahare Kiumarsi, Electrical and Computer Engineering, Michigan State University, United States
Moharram H. Korayem, Robotic Research Lab, Mechanical Engineering Department, Iran University of Science and Technology, Iran, Islamic Republic of
Peter Košťál, Institute of Production Devices and Mechanics, Slovenská Technická Univerzita v Bratislave, Slovak Republic
Constantine Kotropoulos, Dept. of Informatics, Aristotle University of Thessaloniki, Greece
Marek Kraft, Institute of Robotics and Machine Intelligence, Poznan University of Technology, Poland
Masao Kubo, computer science, Narional Defense Academy of Japan, Japan
Haluk Kucuk, School of Engineering and Technology, Lake Superior State University, United States
Kolja Kühnlenz, Department of Electrical Engineering ans Computer Science, Coburg University of Applied Sciences and Arts, Germany
Piotr Kulczycki, Systems Research Institute, Polish Academy of Sciences, Poland
Miroslav Kulich, Czech Technical University in Prague, Czech Republic
Sébastien Lahaye, Automatisation, Istia - LARIS, France
Fabian Andres Lara-Molina, Department of Mechanical Engineering, Federal University of Triângulo Mineiro, Brazil
Sukhan Lee, Department of Artificial Intelligence, Sungkyunkwan University, Korea, Republic of
Ho-Hoon Lee, Industrial and Engineering Technology, Southeastern Louisiana University, United States
Fátima S. Leite, Institute of Systems and Robotics, University of Coimbra, Portugal
Kauko Leiviskä, Control Engineering Laboratory, University of Oulu, Finland
Jr-Shin Li, Electrical and Systems Engineering, Washington University in St. Louis, United States
Yangmin Li, ISE, Hong Kong Polytechnic University, Hong Kong
Gordon Lightbody, Electrical and Electronic Engineering, University College Cork, Ireland
Martin Lukac, Computer Science, Nazarbayev University, Kazakhstan
Chaomin Luo, Mississippi State University, United States
Hichem Maaref, Laboratoire Ibisc, Universite d'EVRY-IUT, France
Anthony A. Maciejewski, Electrical And Computer Engineering, Colorado State University, United States
André Maitelli, Computer And Automation, Federal University of Rio Grande Do Norte, Brazil
Om Malik, Electrical And Computer Engineering, University of Calgary, Canada
Noureddine Manamanni, CRESTIC - Université de Reims Champagne-Ardenne, France
Federico Mari, University of Rome Foro Italico, Italy
Ester Martinez-Martin, Computer Science and Artificial Intelligence, University of Alicante, Spain
Jorge Martins, Department of Mechanical Engineering, Instituto Superior Técnico, Portugal
Pavlo Maruschak, Department of Industrial Automation, Ternopil National Ivan Puluj Technical University, Ukraine
Julien Marzat, DTIS, ONERA, Université Paris Saclay, France
Luca Mazzola, School of Information Technology, HSLU - Lucerne University of Applied Sciences, Switzerland
Ken McGarry, School of Computing, University of Sunderland, United Kingdom
Euan W. McGookin, University of Glasgow, United Kingdom
Seán McLoone, Electonics, Electrical Engineering and Computer Science, Queen's Unviersity Belfast, Ireland
Mahanijah Md Kamal, Universiti Teknologi MARA, Malaysia
Qurban Memon, Electrical Engineering, UAE University, United Arab Emirates
Qinggang Meng, Loughborough University, United Kingdom
Paolo Mercorelli, Institute for Production Technology and Systems, Leuphana University of Lüneburg, Germany
Jaroslaw Milewski, Institute of Heat Engineering, Warsaw University of Technology, Poland
Marek Miskowicz, Department of Electronics, AGH University of Science and Technology, Poland
Paulo Miyagi, Mechatronics Engineering, University of Sao Paulo, Brazil
Saleh Mobayen, Zanjan University, Iran, Islamic Republic of
Héctor Montes, CINEMI, Technological University of Panama, Panama
Rafael Morales, University of Castilla La Mancha, Spain
Vlad Muresan, Automation, Technical University of Cluj-Napoca, Romania
Juan J. Nieto, Mathematical Analysis and Statistics, University of Santiago de Compostela, Spain
Michal Niezabitowski, Silesian University of Technology, Poland
Shimon Y. Nof, PRISM Center, Purdue University, United States
Urbano Nunes, Department of Electrical and Computer Engineering, University of Coimbra, Portugal
Andrzej Obuchowicz, Institute of Control and Computation Engineering, University of Zielona Góra, Poland
Fernando S. Osorio, ICMC - Instituto de Ciências Matemáticas e de Computação / SSC - Dept. de Sistemas de Computação, USP - Universidade de Sao Paulo, Brazil
Samir Otmane, Computer Science, IBISC LAB, University of evry, France
Tandra Pal, CSE, National Institute of Technology, India
Stamatios Papadakis, School of Education - Department of Preschool Education, Department of Preschool Education, Faculty of Education, University of Crete, Greece
Evangelos Papadopoulos, Mechanical Engineering Department, NTUA, Greece
Ju H. Park, Electrical Engineering, Yeungnam University, Korea, Republic of
Igor Paromtchik, Robotic Technologies, France
Tejaswin Parthasarathy, University of Illinois at Urbana Champaign, United States
Anatol Pashkevich, DAPI, IMT Atlantique Nantes, France
Mukesh D. Patil, Electronics and Telecommunication, Ramrao Adik Institute of Technology, India
Mario Pavone, v.le A. Doria 6, University of Catania, Italy
Dariusz Pazderski, Institute of Automation and Robotics, Poznan University of Technology, Poland
Adrian Peidro, Systems Engineering and Automation, Miguel Hernandez University, Spain
Qingjin Peng, Department of Mechanical Engineering, University of Manitoba, Canada
Milica M. Petrovic, Faculty of Mechanical Engineering, University of Belgrade, Serbia
Alexandre Philippot, CReSTIC, University of Reims Champagen Ardenne, France
Jeff Pieper, University of Calgary, Canada
Roel Pieters, Independent Researcher, Finland
Gema Piñero, Institute of Telecommunications and Multimedia Applications (iTEAM), Universitat Politècnica de València, Spain
Ján Piteľ, Technical University of Koice, Slovak Republic
Dan Popescu, Politehnica University of Bucharest, Romania
Mark Post, The University of York, United Kingdom
Anton Satria Prabuwono, King AbdulAziz University, Saudi Arabia
Mohd Syakirin Ramli, Faculty of Electrical, Universiti Malaysia Pahang Al Sultan Abdullah, Malaysia
Navid Razmjooy, Independent Researcher, Iran, Islamic Republic of
Oscar Reinoso, Edif. Innova Ingenieria De Sistemas y Automática, Miguel Hernandez University, Spain
Francisco Restivo, Universidade do Porto, Universidade do Porto, Portugal
Gerasimos Rigatos, Unit of Industrial Automation, Industrial Systems Institute, Greece
Paolo Rocco, Politecnico di Milano, Italy
Ruthber Rodriguez Serrezuela, University Corporation of Huila, Colombia
Alejandro Rodriguez-Angeles, Electrical Engineering, Cinvestav-IPN, Mexico
Olympia Roeva, Bioinformatics and Mathematical Modelling, Institute of Biophysics and Biomedical Engineering, Bulgarian Academy of Sciences, Bulgaria
Raul-Cristian Roman, Dept. Automation and Applied Informatics, Politehnica University of Timisoara, Romania
Juha Röning, Biomimetics and Intelligent Systems, University of Oulu, Finland
Christophe Sabourin, Laboratoire Images, Signaux, et Systèmes Intelligents, Univ. Paris Est Creteil, LISSI, France
Soroush Sadeghnejad, Department of Biomedical Engineering, Amirkabir University of Technology, Iran, Islamic Republic of
Indrajit Saha, Department of Computer Science and Engineering, National Institute of Technical Teachers' Training & Research,FC Block, Sector 3, Salt Lake City, Kolkata - 700106, India., National Institute of Technical Teachers' Training & Research, India
Antonio Sala, Dept. Of Systems Engineering And Control, Universitat Politecnica de Valencia, Spain
Addisson Salazar, Institure of Telecommunications and Multimedia Applications, Universitat Politècnica de València, Spain
Javier Sanchis, Instituto Universitario de Automática e Informática Industrial, Universitat Politècnica de València, Spain
Marcello Sanguineti, DIBRIS, University of Genoa, Italy
Jurek Sasiadek, Carleton University, Canada
Chouki Sentouh, LAMIH UMR CNRS 8201. Université Polytechnique Hauts-de-France, Valenciennes, France, France
Karol Seweryn, Space Research Centre (CBK PAN), Poland
Waqar Shahid Qureshi, School of Computer Science, University of Galway, Pakistan
Madhavan Shanmugavel, Mechatronics Engineering, SRM Institute of Science and Technology, India
Jinhua She, School of Engineering, Tokyo University of Technology, Japan
Saeed Shiry Ghidary, Staffordhshire University, United Kingdom
Michael Short, Science & Engineering, Teesside University, United Kingdom
Manuel Silva, Departamento de Engenharia Electrotécnica, ISEP-Instituto Superior de Engenharia do Porto, Portugal
Vasile Sima, Technical Sciences Academy of Romania, Romania
Azura Che Soh, Electrical & Electronic of Engineering, Universiti Putra Malaysia, Malaysia
Paolo Stegagno, Electrical, Computer and Biomedical Engineering, University of Rhode Island, United States
Adrian-Mihail Stoica, Aerospace Engineering, Polytechnic University Bucharest, Romania
Olaf Stursberg, Control and System Theory, Department of Eletrical Engineering and Computer Science, University of Kassel, Germany
Tomasz Tarczewski, Insitute of Engineering and Technology, Nicolaus Copernicus University, Poland
Daniel Thalmann, Ecole Polytechnique Federale de Lausanne, Switzerland
Gui Y. Tian, Electrical, Electronic and Computer Engineering, Newcastle University, United Kingdom
Germano Torres, R&D, PS Solutions, Brazil
Enrico Tronci, Dipartimento Di Informatica, Universita' Di Roma "la Sapienza", Italy
Antonios Tsourdos, Department of Engineering Physics, Cranfield University, United Kingdom
Anthony Tzes, Engineering/Electrical Engineering/Center for AI and Robotics, New York University, United Arab Emirates
José Valente de Oliveira, Faculdade de Ciências e Tecnologia, DEEI, Universidade do Algarve, Portugal
Yolanda Vidal, Mathematics, Universitat Politecnica de Catalunya, Spain
Alexey Vinel, KIT, Germany
Kostas Vlachos, Department of Computer Science & Engineering, University of Ioannina, Greece
Constantin Volosencu, Department of Automation and Applied Informatics, Politehnica University Timisoara, Romania
Damir Vrancic, Department of Systems and Control, Jožef Stefan Institute, Slovenia
Hongchuan Yu, NCCA, Bournemouth University, United Kingdom
Weiwei Yu, School of Mechanical Engineering, Northwestern Polytechnical University, China
A. Mehmet Yüceer, Inoenue University, Turkey
Jie Zhang, Newcastle University, United Kingdom
Huiyu Zhou, ECIT, Queen's University Belfast, United Kingdom
Cezary Zielinski, Institute of Control and Computation Engineering, Warsaw University of Technology, Poland
Alois Zoitl, LIT Cyber-Physical Systems Lab, Johannes Keppler University, Austria

Submitted by Amy Karns on Tue, 06/04/2024 - 11:05