Visible to the public Biblio

Filters: Keyword is telecommunication network reliability  [Clear All Filters]
Lin, Hua Yi, Hsieh, Meng-Yen, Li, Kuan-Ching.  2021.  A Multi-level Security Key Management Protocol Based on Dynamic M-tree Structures for Internet of Vehicles. 2021 International Symposium on Performance Evaluation of Computer and Telecommunication Systems (SPECTS). :1–5.
With the gradually popular high-speed wireless networks and 5G environments, the quality and reliability of network services will be suited for mobile vehicles. In addition to communicating information between vehicles, they can also communicate information with surrounding roadside equipment, pedestrians or traffic signs, and thus improve the road safety of passers-by.Recently, various countries have continuously invested in research on autonomous driving and unmanned vehicles. The open communication environment of the Internet of Vehicles in 5G will expose all personal information in the field of wireless networks. This research is based on the consideration of information security and personal data protection. We will focus on how to protect the real-time transmission of information between mobile vehicles to prevent from imbedding or altering important transmission information by unauthorized vehicles, drivers or passers-by participating in communications. Moreover, this research proposes a multi-level security key management agreement based on a dynamic M-tree structure for Internet of Vehicles to achieve flexible and scalable key management on large-scale Internet of Vehicles.
Zheng, T., Liu, H., Wang, Z., Yang, Q., Wang, H..  2020.  Physical-Layer Security with Finite Blocklength over Slow Fading Channels. 2020 International Conference on Computing, Networking and Communications (ICNC). :314–319.
This paper studies physical-layer security over slow fading channels, considering the impact of finite-blocklength secrecy coding. A comprehensive analysis and optimization framework is established to investigate the secrecy throughput (ST) of a legitimate user pair coexisting with an eavesdropper. Specifically, we devise both adaptive and non-adaptive optimization schemes to maximize the ST, where we derive optimal parameters including the transmission policy, blocklength, and code rates based on the instantaneous and statistical channel state information of the legitimate pair, respectively. Various important insights are provided. In particular, 1) increasing blocklength improves both reliability and secrecy with our transmission policy; 2) ST monotonically increases with blocklength; 3) ST initially increases and then decreases with secrecy rate, and there exists a critical secrecy rate that maximizes the ST. Numerical results are presented to verify theoretical findings.
Besser, K., Lonnstrom, A., Jorswieck, E. A..  2020.  Neural Network Wiretap Code Design for Multi-Mode Fiber Optical Channels. ICASSP 2020 - 2020 IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP). :8738–8742.
The design of reliable and secure codes with finite block length is an important requirement for industrial machine type communications. In this work, we develop an autoencoder for the multi-mode fiber wiretap channel taking into account the error performance at the legitimate receiver and the information leakage at potential eavesdroppers. The estimate of the mutual information leakage includes AWGN and fading channels. The code design is tailored to the specific channel setup where the eavesdropper experiences a mode dependent loss. Numerical simulations illustrate the performance and show a Pareto improvement of the proposed scheme compared to the state-of-the-art polar wiretap codes.
Xiong, J., Zhang, L..  2020.  Simplified Calculation of Bhattacharyya Parameters in Polar Codes. 2020 IEEE 14th International Conference on Anti-counterfeiting, Security, and Identification (ASID). :169–173.
The construction of polar code refers to selecting K "most reliable polarizing channels" in N polarizing channels to WN(1)transmit information bits. For non-systematic polar code, Arikan proposed a method to measure the channel reliability for BEC channel, which is called Bhattacharyya Parameter method. The calculated complexity of this method is O(N) . In this paper, we find the complementarity of Bhattacharyya Parameter. According to the complementarity, the code construction under a certain channel condition can be quickly deduced from the complementary channel condition.
Wang, L., Guo, D..  2020.  Secure Communication Based on Reliability-Based Hybrid ARQ and LDPC Codes. 2020 Prognostics and Health Management Conference (PHM-Besançon). :304—308.
This paper designs a re-transmission strategy to intensify the security of communication over the additive white Gaussian noise (AWGN) wire-tap channel. In this scheme, irregular low-density parity-check (LDPC) codes work with reliability-based hybrid automatic repeat-request (RB-HARQ). For irregular LDPC codes, the variable nodes have different degrees, which means miscellaneous protection for the nodes. In RB-HARQ protocol, the legitimate receiver calls for re-transmissions including the most unreliable bits at decoder's outputting. The bits' reliability can be evaluated by the average magnitude of a posteriori probability log-likelihood ratios (APP LLRs). Specifically, this scheme utilizes the bit-error rate (BER) to assess the secrecy performance. Besides, the paper gives close analyses of BER through theoretical arguments and simulations. Results of numerical example demonstrate that RB-HARQ protocol with irregular LDPC codes can hugely reinforce the security performance of the communication system.
Adat, V., Parsamehr, R., Politis, I., Tselios, C., Kotsopoulos, S..  2020.  Malicious user identification scheme for network coding enabled small cell environment. ICC 2020 - 2020 IEEE International Conference on Communications (ICC). :1—6.
Reliable communication over the wireless network with high throughput is a major target for the next generation communication technologies. Network coding can significantly improve the throughput efficiency of the network in a cooperative environment. The small cell technology and device to device communication make network coding an ideal candidate for improved performance in the fifth generation of communication networks. However, the security concerns associated with network coding needs to be addressed before any practical implementations. Pollution attacks are considered one of the most threatening attacks in the network coding environment. Although there are different integrity schemes to detect polluted packets, identifying the exact adversary in a network coding environment is a less addressed challenge. This paper proposes a scheme for identifying and locating adversaries in a dense, network coding enabled environment of mobile nodes. It also discusses a non-repudiation protocol that will prevent adversaries from deceiving the network.
Kriaa, S., Papillon, S., Jagadeesan, L., Mendiratta, V..  2020.  Better Safe than Sorry: Modeling Reliability and Security in Replicated SDN Controllers. 2020 16th International Conference on the Design of Reliable Communication Networks DRCN 2020. :1—6.
Software-defined networks (SDN), through their programmability, significantly increase network resilience by enabling dynamic reconfiguration of network topologies in response to faults and potentially malicious attacks detected in real-time. Another key trend in network softwarization is cloud-native software, which, together with SDN, will be an integral part of the core of future 5G networks. In SDN, the control plane forms the "brain" of the software-defined network and is typically implemented as a set of distributed controller replicas to avoid a single point of failure. Distributed consensus algorithms are used to ensure agreement among the replicas on key data even in the presence of faults. Security is also a critical concern in ensuring that attackers cannot compromise the SDN control plane; byzantine fault tolerance algorithms can provide protection against compromised controller replicas. However, while reliability/availability and security form key attributes of resilience, they are typically modeled separately in SDN, without consideration of the potential impacts of their interaction. In this paper we present an initial framework for a model that unifies reliability, availability, and security considerations in distributed consensus. We examine – via simulation of our model – some impacts of the interaction between accidental faults and malicious attacks on SDN and suggest potential mitigations unique to cloud-native software.
Sharma, V., Renu, Shree, T..  2020.  An adaptive approach for Detecting Blackhole using TCP Analysis in MANETs. 2nd International Conference on Data, Engineering and Applications (IDEA). :1—5.

From recent few years, need of information security is realized by society amd researchers specially in multi-path, unstructured networks as Mobile Ad-hoc Network. Devices connected in such network are self-configuring and small in size and can communicate in infra less environment. Architecture is very much dynamic and absence of central controlling authority puts challenges to the network by making more vulnerable for various threats and attacks in order to exploit the function of the network. The paper proposes, TCP analysis against very popular attack i.e. blackhole attack. Under different circumstance, reliable transport layer protocol TCP is analyzed for the effects of the attack on adhoc network. Performance has been measured using metrics of average throughput, normalized routing load and end to end delay and conclusions have been drawn based on that.

Makarfi, A. U., Rabie, K. M., Kaiwartya, O., Li, X., Kharel, R..  2020.  Physical Layer Security in Vehicular Networks with Reconfigurable Intelligent Surfaces. 2020 IEEE 91st Vehicular Technology Conference (VTC2020-Spring). :1—6.

This paper studies the physical layer security (PLS) of a vehicular network employing a reconfigurable intelligent surface (RIS). RIS technologies are emerging as an important paradigm for the realisation of smart radio environments, where large numbers of small, low-cost and passive elements, reflect the incident signal with an adjustable phase shift without requiring a dedicated energy source. Inspired by the promising potential of RIS-based transmission, we investigate two vehicular network system models: One with vehicle-to-vehicle communication with the source employing a RIS-based access point, and the other model in the form of a vehicular adhoc network (VANET), with a RIS-based relay deployed on a building. Both models assume the presence of an eavesdropper to investigate the average secrecy capacity of the considered systems. Monte-Carlo simulations are provided throughout to validate the results. The results show that performance of the system in terms of the secrecy capacity is affected by the location of the RIS-relay and the number of RIS cells. The effect of other system parameters such as source power and eavesdropper distances are also studied.

Padala, S. K., D'Souza, J..  2020.  Performance of Spatially Coupled LDPC Codes over Underwater Acoustic Communication Channel. 2020 National Conference on Communications (NCC). :1–5.
Underwater acoustic (UWA) channel is complex because of its multipath environment, Doppler shift and rapidly changing characteristics. Many of the UWA communication- based applications demand high data rates and reliable communication. The orthogonal frequency division multiplexing (OFDM) system is very effective in UWA channels and provides high data rate with low equalization complexity. It is a challenging task to achieve reliability over these channels. The low-density parity-check (LDPC) codes give a better error performance than turbo codes, for UWA channels. The spatially-coupled low-density parity-check (SC-LDPC) codes have been shown to have the capacity-achieving performance over terrestrial communication. In this paper, we have studied by simulation, the performance of protograph based SC-LDPC codes over shallow water acoustic environment with a communication range of 1000 m and channel bandwidth of 10 KHz. Our results show that SC-LDPC codes give 1 dB performance improvement over LDPC codes at a Bit Error Rate (BER) of 10-3 for the same latency constraints.
Guo, W., Atthanayake, I., Thomas, P..  2020.  Vertical Underwater Molecular Communications via Buoyancy: Gaussian Velocity Distribution of Signal. ICC 2020 - 2020 IEEE International Conference on Communications (ICC). :1–6.
Underwater communication is vital for a variety of defence and scientific purposes. Current optical and sonar based carriers can deliver high capacity data rates, but their range and reliability is hampered by heavy propagation loss. A vertical Molecular Communication via Buoyancy (MCvB) channel is experimentally investigated here, where the dominant propagation force is buoyancy. Sequential puffs representing modulated symbols are injected and after the initial loss of momentum, the signal is driven by buoyancy forces which apply to both upwards and downwards channels. Coupled with the complex interaction of turbulent and viscous diffusion, we experimentally demonstrate that sequential symbols exhibit a Gaussian velocity spatial distribution. Our experimental results use Particle Image Velocimetry (PIV) to trace molecular clusters and infer statistical characteristics of their velocity profile. We believe our experimental paper's results can be the basis for long range underwater vertical communication between a deep sea vehicle and a surface buoy, establishing a covert and reliable delay-tolerant data link. The statistical distribution found in this paper is akin to the antenna pattern and the knowledge can be used to improve physical security.
Ayers, H., Crews, P., Teo, H., McAvity, C., Levy, A., Levis, P..  2020.  Design Considerations for Low Power Internet Protocols. 2020 16th International Conference on Distributed Computing in Sensor Systems (DCOSS). :103–111.
Low-power wireless networks provide IPv6 connectivity through 6LoWPAN, a set of standards to aggressively compress IPv6 packets over small maximum transfer unit (MTU) links such as 802.15.4.The entire purpose of IP was to interconnect different networks, but we find that different 6LoWPAN implementations fail to reliably communicate with one another. These failures are due to stacks implementing different subsets of the standard out of concern for code size. We argue that this failure stems from 6LoWPAN's design, not implementation, and is due to applying traditional Internet protocol design principles to low- power networks.We propose three design principles for Internet protocols on low-power networks, designed to prevent similar failures in the future. These principles are based around the importance of providing flexible tradeoffs between code size and energy efficiency. We apply these principles to 6LoWPAN and show that the modified protocol provides a wide range of implementation strategies while allowing implementations with different strategies to reliably communicate.
Nasser, B., Rabani, A., Freiling, D., Gan, C..  2018.  An Adaptive Telerobotics Control for Advanced Manufacturing. 2018 NASA/ESA Conference on Adaptive Hardware and Systems (AHS). :82—89.
This paper explores an innovative approach to the telerobotics reasoning architecture and networking, which offer a reliable and adaptable operational process for complex tasks. There are many operational challenges in the remote control for manufacturing that can be introduced by the network communications and Iatency. A new protocol, named compact Reliable UDP (compact-RUDP), has been developed to combine both data channelling and media streaming for robot teleoperation. The original approach ensures connection reliability by implementing a TCP-like sliding window with UDP packets. The protocol provides multiple features including data security, link status monitoring, bandwidth control, asynchronous file transfer and prioritizing transfer of data packets. Experiments were conducted on a 5DOF robotic arm where a cutting tool was mounted at its distal end. A light sensor was used to guide the robot movements, and a camera device to provide a video stream of the operation. The data communication reliability is evaluated using Round-Trip Time (RTT), and advanced robot path planning for distributed decision making between endpoints. The results show 88% correlation between the remotely and locally operated robots. The file transfers and video streaming were performed with no data loss or corruption on the control commands and data feedback packets.
Zhao, Q., Du, P., Gerla, M., Brown, A. J., Kim, J. H..  2018.  Software Defined Multi-Path TCP Solution for Mobile Wireless Tactical Networks. MILCOM 2018 - 2018 IEEE Military Communications Conference (MILCOM). :1—9.
Naval Battlefield Network communications rely on wireless network technologies to transmit data between different naval entities, such as ships and shore nodes. Existing naval battle networks heavily depend on the satellite communication system using single-path TCP for reliable, non-interactive data. While satisfactory for traditional use cases, this communication model may be inadequate for outlier cases, such as those arising from satellite failure and wireless signal outage. To promote network stability and assurance in such scenarios, the addition of unmanned aerial vehicles to function as relay points can complement network connectivity and alleviate potential strains in adverse conditions. The inherent mobility of aerial vehicles coupled with existing source node movements, however, leads to frequent network handovers with non-negligible overhead and communication interruption, particularly in the present single-path model. In this paper, we propose a solution based on multi-path TCP and software-defined networking, which, when applied to mobile wireless heterogeneous networks, reduces the network handover delay and improves the total throughput for transmissions among various naval entities at sea and littoral. In case of single link failure, the presence of a connectable relay point maintains TCP connectivity and reduces the risk of service interruption. To validate feasibility and to evaluate performance of our solution, we constructed a Mininet- WiFi emulation testbed. Compared against single-path TCP communication methods, execution of the testbed when configured to use multi-path TCP and UAV relays yields demonstrably more stable network handovers with relatively low overhead, greater reliability of network connectivity, and higher overall end-to-end throughput. Because the SDN global controller dynamically adjusts allocations per user, the solution effectively eliminates link congestion and promotes more efficient bandwidth utilization.
Sharma, Sachin, Ghanshala, Kamal Kumar, Mohan, Seshadri.  2019.  Blockchain-Based Internet of Vehicles (IoV): An Efficient Secure Ad Hoc Vehicular Networking Architecture. 2019 IEEE 2nd 5G World Forum (5GWF). :452–457.
With the transformation of connected vehicles into the Internet of Vehicles (IoV), the time is now ripe for paving the way for the next generation of connected vehicles with novel applications and innovative security measures. The connected vehicles are experiencing prenominal growth in the auto industry, but are still studded with many security and privacy vulnerabilities. Today's IoV applications are part of cyber physical communication systems that collect useful information from thousands of smart sensors associated with the connected vehicles. The technology advancement has paved the way for connected vehicles to share significant information among drivers, auto manufacturers, auto insurance companies and operational and maintenance service providers for various applications. The critical issues in engineering the IoV applications are effective to use of the available spectrum and effective allocation of good channels an opportunistic manner to establish connectivity among vehicles, and the effective utilization of the infrastructure under various traffic conditions. Security and privacy in information sharing are the main concerns in a connected vehicle communication network. Blockchain technology facilitates secured communication among users in a connected vehicles network. Originally, blockchain technology was developed and employed with the cryptocurrency. Bitcoin, to provide increased trust, reliability, and security among users based on peer-to-peer networks for transaction sharing. In this paper, we propose to integrate blockchain technology into ad hoc vehicular networking so that the vehicles can share network resources with increased trust, reliability, and security using distributed access control system and can benefit a wider scope of scalable IoV applications scenarios for decision making. The proposed architecture is the faithful environment for information sharing among connected vehicles. Blockchain technology allows multiple copies of data storage at the distribution cloud. Distributed access control system is significantly more secure than a traditional centralized system. This paper also describes how important of ad hoc vehicular networking in human life, possibilities in real-world implementation and its future trends. The ad hoc vehicular networking may become one of the most trendy networking concepts in the future that has the perspective to bring out much ease human beneficial and secured applications.
Tomić, Ivana, Breza, Michael J., Jackson, Greg, Bhatia, Laksh, McCann, Julie A..  2018.  Design and Evaluation of Jamming Resilient Cyber-Physical Systems. 2018 IEEE International Conference on Internet of Things (iThings) and IEEE Green Computing and Communications (GreenCom) and IEEE Cyber, Physical and Social Computing (CPSCom) and IEEE Smart Data (SmartData). :687—694.

There is a growing movement to retrofit ageing, large scale infrastructures, such as water networks, with wireless sensors and actuators. Next generation Cyber-Physical Systems (CPSs) are a tight integration of sensing, control, communication, computation and physical processes. The failure of any one of these components can cause a failure of the entire CPS. This represents a system design challenge to address these interdependencies. Wireless communication is unreliable and prone to cyber-attacks. An attack upon the wireless communication of CPS would prevent the communication of up-to-date information from the physical process to the controller. A controller without up-to-date information is unable to meet system's stability and performance guarantees. We focus on design approach to make CPSs secure and we evaluate their resilience to jamming attacks aimed at disrupting the system's wireless communication. We consider classic time-triggered control scheme and various resource-aware event-triggered control schemes. We evaluate these on a water network test-bed against three jamming strategies: constant, random, and protocol aware. Our test-bed results show that all schemes are very susceptible to constant and random jamming. We find that time-triggered control schemes are just as susceptible to protocol aware jamming, where some event-triggered control schemes are completely resilient to protocol aware jamming. Finally, we further enhance the resilience of an event-triggered control scheme through the addition of a dynamical estimator that estimates lost or corrupted data.

Pham-Thi-Dan, Ngoc, Do-Dac, Thiem, Ho-Van, Khuong, Vo-Que, Son, Pham-Ngoc, Son.  2019.  On Security Capability of Cooperative Communications in Energy Scavenging Cognitive Radio Networks. 2019 International Conference on Advanced Technologies for Communications (ATC). :89—93.
In this paper, secrecy outage probability (SOP) of cooperative communications in ESCRNs is numerically evaluated by the recommended precise closed-form formula which is corroborated by numerous computer simulations. Results expose that the relay's location, energy scavenging time, message recovering time, and power division for energy scavenging and message recovering dramatically impact the SOP of the cooperative communications in ESCRNs. Moreover, results infer that the SOP is constant either in energy scavenging non-cognitive networks (ES-nonCRNs) or in ESCRNs with infinite power transmitters.
Pham-Thi-Dan, Ngoc, Ho-Van, Khuong, Do-Dac, Thiem, Vo-Que, Son, Pham-Ngoc, Son.  2019.  Security Analysis for Cognitive Radio Network with Energy Scavenging Capable Relay over Nakagami-m Fading Channels. 2019 International Symposium on Electrical and Electronics Engineering (ISEE). :68—72.
In this paper, we propose an exact closed-form expression of secrecy outage probability (SOP) for underlay cognitive network with energy scavenging capable relay over Nakagami-m fading channels and under both (maximum transmit and interference) power constraints. Various results validated the proposed expression and shed insights into the security performance of this network in key specifications.
Torabi, Mohammad, Pouri, Alireza Baghaei.  2019.  Physical Layer Security of a Two-Hop Mixed RF-FSO System in a Cognitive Radio Network. 2019 2nd West Asian Colloquium on Optical Wireless Communications (WACOWC). :167—170.
In this paper, the physical layer (PHY)security performance of a dual-hop cooperative relaying in a cognitive-radio system in the presence of an eavesdropper is investigated. The dual-hop transmission is composed of an asymmetric radio frequency (RF)link and a free space optical (FSO)link. In the considered system, an unlicensed secondary user (SU)uses the spectrum which is shared by a licensed primary user (PU)in a controlled manner to keep the interference at PU receiver, below a predefined value. Furthermore, among M available relays, one relay with the best end-to-end signal-to-noise-ratio (SNR)is selected for transmission. It is assumed that all of the RF links follow Rayleigh fading and all of the FSO links follow Gamma-Gamma distribution. Simulations results for some important security metrics, such as the average secrecy capacity (SC), and secrecy outage probability (SOP)are presented, where some practical issues of FSO links such as atmospheric turbulence, and pointing errors are taken into consideration.
Wu, Xiaoge, Zhang, Lin.  2019.  Robust Chaos-Based Information Masking Polar Coding Scheme for Wiretap Channel in Practical Wireless Systems. 2019 IEEE 90th Vehicular Technology Conference (VTC2019-Fall). :1–5.
In practical wireless communication systems, the channel conditions of legitimate users can not always be better than those of eavesdroppers. This realistic fact brings the challenge for the design of secure transmission over wiretap channels which requires that the eavesdropping channel conditions should be worse than legitimate channels. In this paper, we present a robust chaos-based information masking polar coding scheme for enhancing reliability and security performances under realistic channel conditions for practical systems. In our design, we mask the original information, wherein the masking matrix is determined by chaotic sequences. Then the masked information is encoded by the secure polar coding scheme. After the channel polarization achieved by the polar coding, we could identify the bit-channels providing good transmission conditions for legitimate users and the bit-channels with bad conditions for eavesdroppers. Simulations are performed over the additive white Gaussian noise (AWGN) and slow flat-fading Rayleigh channels. The results demonstrate that compared with existing schemes, the proposed scheme can achieve better reliability and security even when the eavesdroppers have better channel conditions than legitimate users, hence the practicability is greatly enhanced.
Wang, Meng, Zhan, Ming, Yu, Kan, Deng, Yi, Shi, Yaqin, Zeng, Jie.  2019.  Application of Bit Interleaving to Convolutional Codes for Short Packet Transmission. 2019 IEEE International Conference on Industrial Cyber Physical Systems (ICPS). :425–429.
In recent years, the demand for high reliability in industrial wireless communication has been increasing. To meet the strict requirement, many researchers have studied various bit interleaving coding schemes for long packet transmission in industrial wireless networks. Current research shows that the use of bit interleaving structure can improve the performance of the communication system for long packet transmission, but to improve reliability of industrial wireless communications by combining the bit interleaving and channel coding for short packets still requires further analysis. With this aim, bit interleaving structure is applied to convolution code coding scheme for short packet transmission in this paper. We prove that the use of interleaver fail to improve the reliability of data transmission under the circumstance of short packet transmission.
Wu, Xiaoge, Zhang, Lin.  2019.  Chaos-based Information Rotated Polar Coding Scheme for Visible Light Wiretap Channel. 2019 International Conference on Computing, Networking and Communications (ICNC). :864–868.

In this paper, we present a chaos-based information rotated polar coding scheme for enhancing the reliability and security of visible light communication (VLC) systems. In our scheme, we rotate the original information, wherein the rotation principle is determined by two chaotic sequences. Then the rotated information is encoded by secure polar coding scheme. After the channel polarization achieved by the polar coding, we could identify the bit-channels providing good transmission conditions for legitimate users and the bit-channels with bad conditions for eavesdroppers. Simulations are performed over the visible light wiretap channel. The results demonstrate that compared with existing schemes, the proposed scheme can achieve better reliability and security even when the eavesdroppers have better channel conditions.

Frias, Alex Davila, Yodo, Nita, Yadav, Om Prakash.  2019.  Mixed-Degradation Profiles Assessment of Critical Components in Cyber-Physical Systems. 2019 Annual Reliability and Maintainability Symposium (RAMS). :1–6.
This paper presents a general model to assess the mixed-degradation profiles of critical components in a Cyber-Physical System (CPS) based on the reliability of its critical physical and software components. In the proposed assessment, the cyber aspect of a CPS was approached from a software reliability perspective. Although extensive research has been done on physical components degradation and software reliability separately, research for the combined physical-software systems is still scarce. The non-homogeneous Poisson Processes (NHPP) software reliability models are deemed to fit well with the real data and have descriptive and predictive abilities, which could make them appropriate to estimate software components reliability. To show the feasibility of the proposed approach, a case study for mixed-degradation profiles assessment is presented with n physical components and one major software component forming a critical subsystem in CPS. Two physical components were assumed to have different degradation paths with the dependency between them. Series and parallel structures were investigated for physical components. The software component failure data was taken from a wireless network switching center and fitted into a Weibull software reliability model. The case study results revealed that mix-degradation profiles of physical components, combined with software component profile, produced a different CPS reliability profile.
Bouras, Christos, Kanakis, Nikolaos.  2018.  Evolving AL-FEC Application Towards 5G NGMN. 2018 9th IFIP International Conference on New Technologies, Mobility and Security (NTMS). :1–5.
The fifth generation of mobile technology (5G) is positioned to address the demands and business contexts of 2020 and beyond. Therefore, in 5G, there is a need to push the envelope of performance to provide, where needed, for example, much greater throughput, much lower latency, ultra-high reliability, much higher connectivity density, and higher mobility range. A crucial point in the effective provisioning of 5G Next Generation Mobile Networks (NGMN) lies in the efficient error control and in more details in the utilization of Forward Error Correction (FEC) codes on the application layer. FEC is a method for error control of data transmission adopted in several mobile multicast standards. FEC is a feedback free error recovery method where the sender introduces redundant data in advance with the source data enabling the recipient to recover from different arbitrary packet losses. Recently, the adoption of FEC error control method has been boosted by the introduction of powerful Application Layer FEC (AL-FEC) codes. Furthermore, several works have emerged aiming to address the efficient application of AL-FEC protection introducing deterministic or randomized online algorithms. In this work we propose a novel AL-FEC scheme based on online algorithms forced by the well stated AL-FEC policy online problem. We present an algorithm which exploits feedback capabilities of the mobile users regarding the outcome of a transmission, and adapts the introduced protection respectively. Moreover, we provide an extensive analysis of the proposed AL-FEC algorithm accompanied by a performance evaluation against common error protection schemes.
Kapoor, Chavi.  2019.  Routing Table Management using Dynamic Information with Routing Around Connectivity Holes (RACH) for IoT Networks. 2019 International Conference on Automation, Computational and Technology Management (ICACTM). :174—177.

The internet of things (IoT) is the popular wireless network for data collection applications. The IoT networks are deployed in dense or sparse architectures, out of which the dense networks are vastly popular as these are capable of gathering the huge volumes of data. The collected data is analyzed using the historical or continuous analytical systems, which uses the back testing or time-series analytics to observe the desired patterns from the target data. The lost or bad interval data always carries the high probability to misguide the analysis reports. The data is lost due to a variety of reasons, out of which the most popular ones are associated with the node failures and connectivity holes, which occurs due to physical damage, software malfunctioning, blackhole/wormhole attacks, route poisoning, etc. In this paper, the work is carried on the new routing scheme for the IoTs to avoid the connectivity holes, which analyzes the activity of wireless nodes and takes the appropriate actions when required.