Applications of CPS technologies used in manufacturing.
This CPS Frontiers project addresses highly dynamic Cyber-Physical Systems (CPSs), understood as systems where a computing delay of a few milliseconds or an incorrectly computed response to a disturbance can lead to catastrophic consequences. Such is the case of cars losing traction when cornering at high speed, unmanned air vehicles performing critical maneuvers such as landing, or disaster and rescue response bipedal robots rushing through the rubble to collect information or save human lives. The preceding examples currently share a common element: the design of their control software is made possible by extensive experience, laborious testing and fine tuning of parameters, and yet, the resulting closed-loop system has no formal guarantees of meeting specifications. The vision of the project is to provide a methodology that allows for complex and dynamic CPSs to meet real-world requirements in an efficient and robust way through the formal synthesis of control software. The research is developing a formal framework for correct-by-construction control software synthesis for highly dynamic CPSs with broad applications to automotive safety systems, prostheses, exoskeletons, aerospace systems, manufacturing, and legged robotics. The design methodology developed here will improve the competitiveness of segments of industry that require a tight integration between hardware and highly advanced control software such as: automotive (dynamic stability and control), aerospace (UAVs), medical (prosthetics, orthotics, and exoskeleton design) and robotics (legged locomotion). To enhance the impact of these efforts, the PIs are developing interdisciplinary teaching materials to be made freely available and disseminating their work to a broad audience.
Off
University of Michigan Ann Arbor
-
National Science Foundation
Jessy Grizzle Submitted by Jessy Grizzle on December 18th, 2015
Event
ECYPS’2016
4th EUROMICRO/IEEE Workshop on Embedded and Cyber-Physical Systems (ECYPS’2016) ECYPS’2016 - the 4th EUROMICRO/IEEE Workshop on Embedded and Cyber-Physical Systems will be held in the scope of MECO’2016 - the 5th Mediterranean Conference on Embedded Computing. It is devoted to cyber-physical systems (CPS) for modern applications that usually require high-performance, low energy consumption, high safety, security and reliability.
Submitted by Anonymous on December 8th, 2015
Event
ETFA 2016
21th IEEE International Conference on Emerging Technologies & Factory Automation (ETFA 2016) Berlin, Germany | 6-9 September 2016 | Web site: http://www.etfa2016.org/
Submitted by Anonymous on December 4th, 2015
ISORC 2016 ISORC has become established as the leading event devoted to state-of-the-art research in the field of object/component/service-oriented real-time distributed computing (ORC) technology. In 2016, we have adopted a new theme, Real-Time Issues and Challenges for novel applications and systems: Medical devices, intelligent transportation systems, Industrial automation systems, Internet of Things and Smart Grids.
Submitted by Anonymous on December 4th, 2015
Event
IEA/AIE 2016
The Twenty Ninth International Conference on Industrial, Engineering & Other Applications of Applied Intelligent Systems (IEA/AIE-2016) Important Dates                  
Submitted by Anonymous on October 5th, 2015
Event
WFCS 2016
12th IEEE World conference on Factory Communication Systems (WFCS 2016) COMMUNICATION in AUTOMATION  Scope: WFCS is the largest IEEE technical event specially dedicated to industrial communication systems. The aim of this conference is to provide a forum for researchers, practitioners and developers to review current trends in this area and to present and discuss new ideas and new research directions. Focus on:
Submitted by Anonymous on September 18th, 2015
Amy Karns Submitted by Amy Karns on September 18th, 2015
Event
ICCPS 2016
7th ACM/IEEE International Conference on Cyber-Physical Systems (ICCPS 2016) held as part of CPS Week 2016 to be held in Vienna, Austria, from 11 to 14 April 2016.
Submitted by Anonymous on September 18th, 2015

Dear Colleague,

We would like to cordially invite you to contribute a book chapter to a forthcoming book entitled " Security and Privacy in Cyber-Physical Systems: Foundations and Applications", which will be published by Wiley (https://sites.google.com/site/wileycpsspbook/).

Cyber-physical systems (CPS) are engineered systems that are built from, and depend upon, the seamless integration of computational algorithms and physical components. Advances in CPS will enable capability, adaptability, scalability, resiliency, safety, security, and usability that will far exceed the simple embedded systems of today. CPS are subject to threats stemming from increasing reliance on computer and communication technologies. Security threats exploit the increased complexity and connectivity of critical infrastructure systems, placing the Nation’s security, economy, public safety, and health at risk. CPS blur the lines between infrastructural and personal spaces when they provide convenient access to public services or bridge the gap between personal property and public infrastructure. This blurring is being engineered into the Internet of Things (IoT), an important exponent of CPS. With IoT, personal CPS (like phones, appliances, and automobiles) bearing personal data can reach up into public infrastructures to access services. This connectivity can result in leakage of personal data with attendant privacy concerns. 

    The purpose of the book is to refine an understanding of the key technical, social and legal issues at stake, to understand the range of technical issues affecting hardware and software in infrastructure components, as well as the blending of such systems with personal CPS. This book will present the state of the art and the state of the practice of how to address the following unique security and privacy challenges facing CPS.


Call for Book Chapter Proposals
Chapter Proposal Submission by September 27, 2015.

Submission Procedure:
Please email your abstract (max. 500 words) by September 27, 2015 to cps.wiley@gmail.com.

Tentative Table of Contents – additions to the topics listed below are much welcome!

 

Part I: Foundations and Principles

Chapter 1. Cybersecurity and Privacy: Past, Present and Future

Chapter 2. The interplay of Cyber, Physical, and Human elements in CPS

Chapter 3. Adaptive attack mitigation for CPS

Chapter 4. Authentication and access control for CPS

Chapter 5. Availability, recovery and auditing for CPS

Chapter 6. Data security and privacy for CPS

Chapter 7. Intrusion detection for CPS

Chapter 8. Key management in CPS

Chapter 9. Legacy CPS system protection

Chapter 10. Lightweight crypto and security

Chapter 11. Threat modeling for CPS

Chapter 12. Vulnerability analysis for CPS

 

Part II: Application Domains 

Chapter 13.            Energy

Chapter 14.            Medical

Chapter 15.            Transportation

Chapter 16.            Physical Infrastructure

Chapter 17.            Manufacturing

Chapter 18.            Building

Chapter 19.            Agriculture

Chapter 20.            Robotics

Chapter 21.            Unmanned Aerial Vehicles

Chapter 22.            Smart Cities


Please provide the following points in your proposals/abstracts:
1. Title of the contribution,
2. Title of the chapter (of the tentative TOC) if the contribution refers to one of them,
3. Name of author, co-authors, institution, email-address,
4. Content/mission of the proposed article.

Authors of accepted proposals will be notified by the given deadline about the status of their proposals and sent chapter guidelines.

Full Book Chapter:
Complete chapters are required to be submitted to cps.wiley@gmail.com. Author could use LaTex or any word processing tools (MS Word, OpenDocument, etc.) while preparing the chapters. A book chapter is required to be 18 to 25 pages (8,000 to 10,000 words).

Please provide the following points in your contribution:
1. Chapter title
2. Author information (of all authors: title, first name, last name, organization, address, city, zip code, country, email address)
3. Abstract
4. 5-10 keywords
5. Text body
6. Bibliography

Important Dates:

·         Chapter Proposal Submission by: September 27, 2015

·         Author Notification by: October 11, 2015

·         Full Chapter Submission by: November 30, 2015

·         Review Results Returned by: December 31, 2015

·         Final Chapter Submission by: February 15, 2016

·         Anticipated Publication Date: Summer, 2016 

Editors:

Houbing Song, West Virginia University, USA. <Houbing.Song@mail.wvu.edu>

Glenn A. Fink, Pacific Northwest National Laboratory, USA. <Glenn.Fink@pnnl.gov>

Gilad L. Rosner, Internet of Things Privacy Forum, UK. <gilad@giladrosner.com>

Sabina Jeschke, RWTH Aachen University, Germany. <sabina.jeschke@ima-zlw-ifu.rwth-aachen.de>

General Announcement
Not in Slideshow
Houbing Song Submitted by Houbing Song on September 11th, 2015

CALL FOR WORKSHOP AND TUTORIAL PROPOSALS

Cyber-Physical Systems Week (CPS Week)

April 11-14, 2016 | Vienna, Austria | http://www.cpsweek.org/2016/

CPS Week is the premier event on Cyber-Physical Systems. It brings together four top conferences, HSCC, ICCPS, IPSN, and RTAS, 10-15 workshops, a localization competition, tutorials, and various exhibitions from both industry and academia. Altogether the CPS Week program covers a multitude of complementary aspects of CPS, and reunites the leading researchers in this dynamic field. CPS Week 2016 in Vienna, Austria, will host 10-15 workshops (subject to room availability) and 2-3 tutorials on Monday April 11 and is soliciting proposals for new and recurring workshops as well as for tutorials. CPS Week workshops are excellent opportunities to bring together researchers and practitioners from different  communities to share their experiences in an interactive atmosphere and to foster collaboration for new and innovative projects. We invite you to  submit workshop proposals on any topic related to the broad set of research, education, and application areas in cyber-physical systems.

Guidelines for workshop proposals:

Proposals should be submitted at the latest by *** October 1, 2015 ***

A workshop proposal consists of a 2-page maximum PDF file, including the following information:

  • A concise title of the workshop
  • Description of the topics and specific issues that the workshop will address, how the workshop complements CPS Week conferences and why the workshop theme is relevant
  • Expected format of the workshop (regular paper presentations, poster presentations, invited talks, panel discussions, demo sessions, or other ideas to promote active exchange of ideas)
  • Organizers with short bio, affiliation, and their expertise in the proposed topic(s)
  • In case the workshop has been previously held, provide information to show that the previous edition(s) were successful in terms of paper submissions and/or attendance. Links to past workshop editions would be very helpful too.
  • Length of the workshop (half-day/one-day) and the expected number of participants
  • Follow-up plans (if any) to disseminate the ideas from the workshop, for example through proceedings or journal special issue

Please submit your workshop proposal by email to the workshop and tutorial chairsChristoph Kirsch (ck@cs.uni-salzburg.at) and Ana Sokolova (anas@cs.uni-salzburg.at). Please write “[CPSWeek 2016] Workshop Proposal" in the e-mail subject line.

Guidelines for tutorial proposals:
Proposals should be submitted at the latest by *** October 1, 2015 ***

A proposal consists of a 2-page maximum PDF file, including the following  information on the tutorial program:

  • The title and abstract of the tutorial
  • An outline of tutorial content and objectives
  • Prerequisite knowledge
  • Organizers/Speakers with short bio, affiliation, and their expertise in the proposed topic(s)
  • In case the tutorial has been previously held, include information on the last tutorial of the same topic held within CPS Week or other conferences such as the year it was held and the number of attendees. A link to past tutorial would be very helpful too.
  • We envision tutorials to last for 3 hours.

Please submit your tutorial proposal by email to the workshop and tutorial chairs, Christoph Kirsch (ck@cs.uni-salzburg.at) and Ana Sokolova (anas@cs.uni-salzburg.at). Please write “[CPSWeek 2016] Tutorial Proposal" in the e-mail subject line.
———————————————————————————————————— 
Notification of acceptance  *** October 15, 2015 ***
———————————————————————————————————— 

General Announcement
Not in Slideshow
Submitted by Anonymous on August 25th, 2015
Subscribe to Manufacturing