Designing semi-autonomous networks of miniature robots for inspection of bridges and other large civil infrastructure According to the U.S. Department of Transportation, the United States has 605102 bridges of which 64% are 30 years or older and 11% are structurally deficient. Visual inspection is a standard procedure to identify structural flaws and possibly predict the imminent collapse of a bridge and determine effective precautionary measures and repairs. Experts who carry out this difficult task must travel to the location of the bridge and spend many hours assessing the integrity of the structure. The proposal is to establish (i) new design and performance analysis principles and (ii) technologies for creating a self-organizing network of small robots to aid visual inspection of bridges and other large civilian infrastructure. The main idea is to use such a network to aid the experts in remotely and routinely inspecting complex structures, such as the typical girder assemblage that supports the decks of a suspension bridge. The robots will use wireless information exchange to autonomously coordinate and cooperate in the inspection of pre-specified portions of a bridge. At the end of the task, or whenever possible, they will report images as well as other key measurements back to the experts for further evaluation. Common systems to aid visual inspection rely either on stationary cameras with restricted field of view, or tethered ground vehicles. Unmanned aerial vehicles cannot access constricted spaces and must be tethered due to power requirements and the need for uninterrupted communication to support the continual safety critical supervision by one or more operators. In contrast, the system proposed here would be able to access tight spaces, operate under any weather, and execute tasks autonomously over long periods of time. The fact that the proposed framework allows remote expert supervision will reduce cost and time between inspections. The added flexibility as well as the increased regularity and longevity of the deployments will improve the detection and diagnosis of problems, which will increase safety and support effective preventive maintenance. This project will be carried out by a multidisciplinary team specialized in diverse areas of cyber-physical systems and robotics, such as locomotion, network science, modeling, control systems, hardware sensor design and optimization. It involves collaboration between faculty from the University of Maryland (UMD) and Resensys, which specializes in remote bridge monitoring. The proposed system will be tested in collaboration with the Maryland State Highway Administration, which will also provide feedback and expertise throughout the project. This project includes concrete plans to involve undergraduate students throughout its duration. The investigators, who have an established record of STEM outreach and education, will also leverage on exiting programs and resources at the Maryland Robotics Center to support this initiative and carry out outreach activities. In order to make student participation more productive and educational, the structure of the proposed system conforms to a hardware architecture adopted at UMD and many other schools for the teaching of undergraduate courses relevant to cyber-physical systems and robotics. This grant will support research on fundamental principles and design of robotic and cyber-physical systems. It will focus on algorithm design for control and coordination, network science, performance evaluation, microfabrication and system integration to address the following challenges: (i) Devise new locomotion and adhesion principles to support mobility within steel and concrete girder structures. (ii) Investigate the design of location estimators, omniscience and coordination algorithms that are provably optimal, subject to power and computational constraints. (iii) Methods to design and analyze the performance of energy-efficient communication protocols to support robot coordination and localization in the presence of the severe propagation barriers caused by metal and concrete structures of a bridge.

This Cyber-Physical Systems (CPS) award supports research to enable the automated monitoring of building and infrastructure construction projects. The purpose of construction monitoring is to provide developers, contractors, subcontractors, and tradesmen with the information they need to easily and quickly make project control decisions. These decisions have a direct impact on the overall efficiency of a construction project. Given that construction is a $800 billion industry, gains in efficiency could lead to enormous cost savings, benefiting both the U.S. economy and society. In particular, both construction cost and delivery time could be significantly reduced by automated tools to assess progress towards completion (progress monitoring) and how construction resources are being utilized (activity monitoring). These tools will be provided by advances in the disciplines of computer vision, robotics, and construction management. The interdisciplinary nature of this project will create synergy among these disciplines and will positively influence engineering education. Partnerships with industry will also ensure that these advances have a positive impact on construction practice. The process of construction monitoring involves data collection, analysis, and reporting. Research will address the existing scientific challenges to automating these three activities. Data collection will be automated by recording video with aerial robots and a network of cameras. Key research objectives are to derive planning algorithms that guarantee complete coverage of a construction site and to derive vision-based control algorithms that enable robust placement and retrieval of cameras. Analysis will be automated with a digital building information model with respect to which construction resources can be tracked. Key research objectives are to improve the efficiency and reliability of image-based reconstruction, to recognize material properties as well as geometry, to establish a formal language for representing construction activities, and to extend a parts-based approach for automated activity recognition. Reporting will be automated with a ubiquitous display of the digital building information model. Key research objectives are to formalize a constraint construction ontology with associated classification mechanisms and allow for systematic earned value analysis of construction progress. Experimental validation will focus on monitoring construction of substructure and superstructure skeletal elements in buildings and infrastructure systems as well as the associated earth-moving, concrete placement, and steel erection activities that are common in construction projects.

Advances in technology mean that computer-controlled physical devices that currently still require human operators, such as automobiles, trains, airplanes, and medical treatment systems, could operate entirely autonomously and make rational decisions on their own. Autonomous cars and drones are a concrete and highly publicized face of this dream. Before this dream can be realized we must address the need for safety - the guaranteed absence of undesirable behaviors emerging from autonomy. Highly publicized technology accidents such as rocket launch failures, uncontrolled exposure to radiation during treatment, aircraft automation failures and unintended automotive accelerations serve as warnings of what can happen if safety is not adequately addressed in the design of such cyber-physical systems. One approach for safety analysis is the use of software tools that apply formal logic to prove the absence of undesired behavior in the control software of a system. In prior work, this approach this been proven to work for simple controller software that is generated automatically by tools from abstract models like Simulink diagrams. However, autonomous decision making requires more complex software that is able to solve optimization problems in real time. Formal verification of control software that includes such optimization algorithms remains an unmet challenge. The project SORTIES (Semantics of Optimization for Real Time Intelligent Embedded Systems) draws upon expertise in optimization theory, control theory, and computer science to address this challenge. Beginning with the convergence properties of convex optimization algorithms, SORTIES examines how these properties can be automatically expressed as inductive invariants for the software implementation of the algorithms, and then incorporates these properties inside the source code itself as formal annotations which convey the underlying reasoning to the software engineer and to existing computer-aided verification tools. The SORTIES goal is an open-source-semantics-carrying autocoder, which takes an optimization algorithm and its convergence properties as input, and produces annotated, verifiable code as output. The demonstration of the tool on several examples, such as a Mars lander, an aircraft avionics system, and a jet engine controller, shows that the evidence of quality produced by annotations is fully compatible with its application to truly functional products. Project research is integrated with education through training of "tri-lingual" professionals, who are equally conversant in system operation, program analysis, and the theory of control and optimization.

The project investigates a formal verification framework for artificial pancreas (AP) controllers that automate the delivery of insulin to patients with type-1 diabetes (T1D). AP controllers are safety critical: excessive insulin delivery can lead to serious, potentially fatal, consequences. The verification framework under development allows designers of AP controllers to check that their control algorithms will operate safely and reliably against large disturbances that include patient meals, physical activities, and sensor anomalies including noise, delays, and sensor attenuation. The intellectual merits of the project lie in the development of state-of-the-art formal verification tools, that reason over mathematical models of the closed-loop including external disturbances and insulin-glucose response. These tools perform an exhaustive exploration of the closed loop system behaviors, generating potentially adverse situations for the control algorithm under verification. In addition, automatic techniques are being investigated to help AP designers improve the control algorithm by tuning controller parameters to eliminate harmful behaviors and optimize performance. The broader significance and importance of the project are to minimize the manual testing effort for AP controllers, integrate formal tools in the certification process, and ultimately ensure the availability of safe and reliable devices to patients with type-1 diabetes. The framework is made available to researchers who are developing AP controllers to help them verify and iteratively improve their designs. The team is integrating the research into the educational mission by designing hands-on courses to train undergraduate students in the science of Cyber-Physical Systems (CPS) using the design of AP controllers as a motivating example. Furthermore, educational material that explains the basic ideas, current challenges and promises of the AP concept is being made available to a wide audience that includes patients with T1D, their families, interested students, and researchers. The research is being carried out collaboratively by teams of experts in formal verification for Cyber-Physical Systems, control system experts with experience designing AP controllers, mathematical modeling experts, and clinical experts who have clinically evaluated AP controllers. To enable the construction of the verification framework from the current state-of-the-art verification tools, the project is addressing major research challenges, including (a) building plausible mathematical models of disturbances from available clinical datasets characterizing human meals, activity patterns, and continuous glucose sensor anomalies. The resulting models are integrated in a formal verification framework; (b) simplifying existing models of insulin glucose response using smaller but more complex delay differential models; (c) automating the process of abstracting the controller implementation for the purposes of verification; (d) producing verification results that can be interpreted by control engineers and clinical researchers without necessarily understanding formal verification techniques; and (e) partially automating the process of design improvements to potentially eliminate severe faults and improve performance. The framework is evaluated on a set of promising AP controller designs that are currently under various stages of clinical evaluation.

This project represents a cross-disciplinary collaborative research effort on developing rigorous, closed-loop approaches for designing, simulating, and verifying medical devices. The work will open fundamental new approaches for radically accelerating the pace of medical device innovation, especially in the sphere of cardiac-device design. Specific attention will be devoted to developing advanced formal methods-based approaches for analyzing controller designs for safety and effectiveness; and devising methods for expediting regulatory and other third-party reviews of device designs. The project team includes members with research backgrounds in computer science, electrical engineering, biophysics, and cardiology; the PIs will use a coordinated approach that balances theoretical, experimental and practical concerns to yield results that are intended to transform the practice of device design while also facilitating the translation of new cardiac therapies into practice. The proposed effort will lead to significant advances in the state of the art for system verification and cardiac therapies based on the use of formal methods and closed-loop control and verification. The animating vision for the work is to enable the development of a true in silico design methodology for medical devices that can be used to speed the development of new devices and to provide greater assurance that their behaviors match designers' intentions, and to pass regulatory muster more quickly so that they can be used on patients needing their care. The scientific work being proposed will serve this vision by providing mathematically robust techniques for analyzing and verifying the behavior of medical devices, for modeling and simulating heart dynamics, and for conducting closed-loop verification of proposed therapeutic approaches. The acceleration in medical device innovation achievable as a result of the proposed research will also have long-term and sustained societal benefits, as better diagnostic and therapeutic technologies enter into the practice of medicine more quickly. It will also yield a collection of tools and techniques that will be applicable in the design of other types of devices. Finally, it will contribute to the development of human resources and the further inclusion of under-represented groups via its extensive education and outreach programs, including intensive workshop experiences for undergraduates.

This project addresses the foundational problem of knowledge within cyber-physical systems (CPS), i.e., systems that combine aspects such as communication, computation, and physics. A single system observes its environment through sensors and interacts through actuators. Neither is perfect. Thus, the CPS's internal view of the world is blurry and its actions are imprecise. CPS are still analyzed with methods that do not distinguish between truth in the world and an internal view thereof, resulting in a mismatch between the behavior of theoretical models and their real-world counterparts. How could they be trusted to perform safety-critical tasks? This project addresses this critical insufficiency by developing methods to reason about knowledge and learning in CPS. The project pursues the development of new logical principles for verifying knowledge-aware CPS. This project investigates how to make the mismatch between the world and the partial perception through sensors explicit and how to achieve provably correct control in theory as well as practice despite this mismatch. By investigating changing knowledge in a changing world, this project contributes to a fundamental feature without which CPS can never be truly safe and efficient at the same time. The project's broader significance and importance are a result of the widespread attention that CPS gain in many safety-critical areas, such as in aviation and automotive industries. One reason for safety gaps in such CPS is that formal verification techniques are still largely knowledge-agnostic, and verifiable solutions overly pessimistic. This project addresses these issues and provides tools that allow for incorporating knowledge about the environment's intentions into the models to derive provably correct, but justifiably optimistic, and thus efficient, behavior. By their logical nature, these techniques are applicable to a wide range of CPS and, thus, contribute significantly to numerous applications. Results obtained within this project will be demonstrated in CPS models and laboratory robot scenarios, and will be shared in courses and with industrial partners. The technical approach that this project pursues develops a new modeling language, logic, and proof calculus for verifying knowledge-aware CPS. The knowledge paradigm used allows CPS controllers to seamlessly acquire knowledge about the world but also about other agents in the system, i.e., other controllers. Knowledge is the key to interactions between different agents. This project investigates how an explicit model of world perception and agent intentions - and knowledge of these perceptions and intentions - allows CPS agents to act, based on more efficient, but still provably safe control in multi-agent scenarios. The methods will be implemented in the verification tool KeYmaera and demonstrated in formal verification on different case study applications such as car scenarios.

This project represents a cross-disciplinary collaborative research effort on developing rigorous, closed-loop approaches for designing, simulating, and verifying medical devices. The work will open fundamental new approaches for radically accelerating the pace of medical device innovation, especially in the sphere of cardiac-device design. Specific attention will be devoted to developing advanced formal methods-based approaches for analyzing controller designs for safety and effectiveness; and devising methods for expediting regulatory and other third-party reviews of device designs. The project team includes members with research backgrounds in computer science, electrical engineering, biophysics, and cardiology; the PIs will use a coordinated approach that balances theoretical, experimental and practical concerns to yield results that are intended to transform the practice of device design while also facilitating the translation of new cardiac therapies into practice. The proposed effort will lead to significant advances in the state of the art for system verification and cardiac therapies based on the use of formal methods and closed-loop control and verification. The animating vision for the work is to enable the development of a true in silico design methodology for medical devices that can be used to speed the development of new devices and to provide greater assurance that their behaviors match designers' intentions, and to pass regulatory muster more quickly so that they can be used on patients needing their care. The scientific work being proposed will serve this vision by providing mathematically robust techniques for analyzing and verifying the behavior of medical devices, for modeling and simulating heart dynamics, and for conducting closed-loop verification of proposed therapeutic approaches. The acceleration in medical device innovation achievable as a result of the proposed research will also have long-term and sustained societal benefits, as better diagnostic and therapeutic technologies enter into the practice of medicine more quickly. It will also yield a collection of tools and techniques that will be applicable in the design of other types of devices. Finally, it will contribute to the development of human resources and the further inclusion of under-represented groups via its extensive education and outreach programs, including intensive workshop experiences for undergraduates.

This project represents a cross-disciplinary collaborative research effort on developing rigorous, closed-loop approaches for designing, simulating, and verifying medical devices. The work will open fundamental new approaches for radically accelerating the pace of medical device innovation, especially in the sphere of cardiac-device design. Specific attention will be devoted to developing advanced formal methods-based approaches for analyzing controller designs for safety and effectiveness; and devising methods for expediting regulatory and other third-party reviews of device designs. The project team includes members with research backgrounds in computer science, electrical engineering, biophysics, and cardiology; the PIs will use a coordinated approach that balances theoretical, experimental and practical concerns to yield results that are intended to transform the practice of device design while also facilitating the translation of new cardiac therapies into practice. The proposed effort will lead to significant advances in the state of the art for system verification and cardiac therapies based on the use of formal methods and closed-loop control and verification. The animating vision for the work is to enable the development of a true in silico design methodology for medical devices that can be used to speed the development of new devices and to provide greater assurance that their behaviors match designers' intentions, and to pass regulatory muster more quickly so that they can be used on patients needing their care. The scientific work being proposed will serve this vision by providing mathematically robust techniques for analyzing and verifying the behavior of medical devices, for modeling and simulating heart dynamics, and for conducting closed-loop verification of proposed therapeutic approaches. The acceleration in medical device innovation achievable as a result of the proposed research will also have long-term and sustained societal benefits, as better diagnostic and therapeutic technologies enter into the practice of medicine more quickly. It will also yield a collection of tools and techniques that will be applicable in the design of other types of devices. Finally, it will contribute to the development of human resources and the further inclusion of under-represented groups via its extensive education and outreach programs, including intensive workshop experiences for undergraduates.

Recent developments in nanotechnology and synthetic biology have enabled a new direction in biological engineering: synthesis of collective behaviors and spatio-temporal patterns in multi-cellular bacterial and mammalian systems. This will have a dramatic impact in such areas as amorphous computing, nano-fabrication, and, in particular, tissue engineering, where patterns can be used to differentiate stem cells into tissues and organs. While recent technologies such as tissue- and organoid on-a-chip have the potential to produce a paradigm shift in tissue engineering and drug development, the synthesis of user-specified, emergent behaviors in cell populations is a key step to unlock this potential and remains a challenging, unsolved problem. This project brings together synthetic biology and micron-scale mobile robotics to define the basis of a next-generation cyber-physical system (CPS) called biological CPS (bioCPS). Synthetic gene circuits for decision making and local communication among the cells are automatically synthesized using a Bio-Design Automation (BDA) workflow. A Robot Assistant for Communication, Sensing, and Control in Cellular Networks (RA), which is designed and built as part of this project, is used to generate desired patterns in networks of engineered cells. In RA, the engineered cells interact with a set of micro-robots that implement control, sensing, and long-range communication strategies needed to achieve the desired global behavior. The micro-robots include both living and non-living matter (engineered cells attached to inorganic substrates that can be controlled using externally applied fields). This technology is applied to test the formation of various patterns in living cells. The project has a rich education and outreach plan, which includes nationwide activities for CPS education of high-school students, lab tours and competitions for high-school and undergraduate students, workshops, seminars, and courses for graduate students, as well as specific initiatives for under-represented groups. Central to the project is the development of theory and computational tools that will significantly advance that state of the art in CPS at large. A novel, formal methods approach is proposed for synthesis of emergent, global behaviors in large collections of locally interacting agents. In particular, a new logic whose formulas can be efficiently learned from quad-tree representations of partitioned images is developed. The quantitative semantics of the logic maps the synthesis of local control and communication protocols to an optimization problem. The project contributes to the nascent area of temporal logic inference by developing a machine learning method to learn temporal logic classifiers from large amounts of data. Novel abstraction and verification techniques for stochastic dynamical systems are defined and used to verify the correctness of the gene circuits in the BDA workflow.

Recent developments in nanotechnology and synthetic biology have enabled a new direction in biological engineering: synthesis of collective behaviors and spatio-temporal patterns in multi-cellular bacterial and mammalian systems. This will have a dramatic impact in such areas as amorphous computing, nano-fabrication, and, in particular, tissue engineering, where patterns can be used to differentiate stem cells into tissues and organs. While recent technologies such as tissue- and organoid on-a-chip have the potential to produce a paradigm shift in tissue engineering and drug development, the synthesis of user-specified, emergent behaviors in cell populations is a key step to unlock this potential and remains a challenging, unsolved problem. This project brings together synthetic biology and micron-scale mobile robotics to define the basis of a next-generation cyber-physical system (CPS) called biological CPS (bioCPS). Synthetic gene circuits for decision making and local communication among the cells are automatically synthesized using a Bio-Design Automation (BDA) workflow. A Robot Assistant for Communication, Sensing, and Control in Cellular Networks (RA), which is designed and built as part of this project, is used to generate desired patterns in networks of engineered cells. In RA, the engineered cells interact with a set of micro-robots that implement control, sensing, and long-range communication strategies needed to achieve the desired global behavior. The micro-robots include both living and non-living matter (engineered cells attached to inorganic substrates that can be controlled using externally applied fields). This technology is applied to test the formation of various patterns in living cells. The project has a rich education and outreach plan, which includes nationwide activities for CPS education of high-school students, lab tours and competitions for high-school and undergraduate students, workshops, seminars, and courses for graduate students, as well as specific initiatives for under-represented groups. Central to the project is the development of theory and computational tools that will significantly advance that state of the art in CPS at large. A novel, formal methods approach is proposed for synthesis of emergent, global behaviors in large collections of locally interacting agents. In particular, a new logic whose formulas can be efficiently learned from quad-tree representations of partitioned images is developed. The quantitative semantics of the logic maps the synthesis of local control and communication protocols to an optimization problem. The project contributes to the nascent area of temporal logic inference by developing a machine learning method to learn temporal logic classifiers from large amounts of data. Novel abstraction and verification techniques for stochastic dynamical systems are defined and used to verify the correctness of the gene circuits in the BDA workflow.