Holonic Multi-Agent Control of Intelligent Power Distribution Systems This project will demonstrate a Holonic Multiagent System Architecture capable of adaptively controlling future electrical power distribution systems (PDS), which are expected to include a large number of renewable power generators, energy storage devices, and advanced metering and control devices. The project will produce a general, extensible, and secure cyber architecture based on holonic multiagent principles to support adaptive PDS. It will produce new analytical insights to quantify the impact of information delay, quality and flow on the design and analysis of the PDS architecture. Finally, it will develop a novel approach to automating PDS with high penetration of distributed renewable resources for higher efficiency, reliability, security, and resiliency. The complex nature of future PDS will require them to adapt reactively and proactively to normal and anomalous modes of operation. The architecture produced by this project will be capable of optimizing performance and maintaining the system within operating limits during normal and minor events, such as cloud cover that reduces solar panels output. The architecture will also allow the operation of a distribution system as an island in emergencies, such as hurricanes/earthquakes, grid failures, or terrorist acts. The project will inspire future engineers via a simulation that will allow students to inject faults, failures, and weather events to see how an intelligent PDS will respond. These activities will combine cyber- and physical expertise, thus creating a workforce prepared for tomorrow?s cyber-physical system challenges. Existing university programs will be used to involve under-represented minorities and U.S. veterans in the project.

The national transmission networks that deliver high voltage electric power underpin our society and are central to the ongoing transformation of the American energy infrastructure. Transmission networks are very large and complicated engineering systems, and "keeping the lights on" as the transformation of the American energy infrastructure proceeds is a fundamental engineering challenge involving both the physical aspects of the equipment and the cyber aspects of the controls, communications, and computers that run the system. The project develops new principles of cyber-physical engineering by focusing on instabilities of electric power networks that can cause blackouts. It proposes novel approaches to analyze these instabilities and to design cyber-physical control methods to monitor, detect, and mitigate them. The controls must perform robustly in the presence of variability and uncertainty in electric generation, loads, communications, and equipment status, and during abnormal states caused by natural faults or malicious attacks. The research produces cyber-physical engineering methodologies that specifically help to mitigate power system blackouts and more generally show the way forward in designing robust cyber-physical systems in environments characterized by rich dynamics and uncertainty. Education and outreach efforts involve students at high school, undergraduate, and graduate levels, as well as dissemination of results to the public and the engineering and applied science communities in industry, government and universities.

Cyber-physical systems regulating critical infrastructures, such as electrical grids and water networks, are increasingly geographically distributed, necessitating communication between remote sensors, actuators and controllers. The combination of networked computational and physical subsystems leads to new security vulnerabilities that adversaries can exploit with devastating consequences. A synchronized attack on the interdependent network components and physical plants can create complex and new security vulnerabilities that cannot be addressed by securing the constituent systems individually. This project takes a holistic view by utilizing the properties of physical systems to design new secure protocols and architectures for cyber-physical systems (CPS) through a unified conceptual framework, which uses models for the physical system and the communication/computation network to define precise attack models and vulnerabilities. These mathematical models are used to design algorithms and protocols with provable operational security guarantees, thus enabling the design of more trustworthy architectures and components. The algorithms, protocols, and architectures are validated on CPS testbeds targeting building, automobile, and smart-grid applications. Additionally, the research is being integrated into the curriculum via the creation of novel coursework combining the underlying control, information theory, cryptography, and embedded system concepts. By improving the protection of critical cyber-physical infrastructure against emerging threats, this research is expected to provide direct socio-economic benefits, ranging from individual organizations to a national scale. The inter-disciplinary team of this project will integrate teaching and curriculum development with the research, contributing to the training of a new generation of engineers well versed in the design of trustworthy cyber-physical systems.

Robotic devices are excellent candidates for delivering repetitive and intensive practice that can restore functional use of the upper limbs, even years after a stroke. Rehabilitation of the wrist and hand in particular are critical for recovery of function, since hands are the primary interface with the world. However, robotic devices that focus on hand rehabilitation are limited due to excessive cost, complexity, or limited functionality. A design and control strategy for such devices that bridges this gap is critical. The goals of the research effort are to analyze the properties and role of passive dynamics, defined by joint stiffness and damping, in the human hand and wrist during grasping and manipulation, and then mimic such properties in a wrist-hand exoskeleton for stroke rehabilitation. The project will culminate with device testing in collaboration with rehabilitation clinicians. A significant problem in robotic rehabilitation is how to provide assisted movement to the multiple degrees of freedom of the hand in order to restore motor coordination and function, with a system that is practical for deployment in a clinical environment. Armed with a clearer understanding of the mechanisms underlying passive dynamics and control of systems exhibiting such behavior, this project will inform the design of more effective wrist/hand rehabilitation devices that are feasible for clinical use. In addition, the proposed project will create a unique interdisciplinary environment enabling education, training, and co-advising of graduate students, undergraduate research, and significant and targeted outreach activities to underrepresented groups in science and engineering.

The national transmission networks that deliver high voltage electric power underpin our society and are central to the ongoing transformation of the American energy infrastructure. Transmission networks are very large and complicated engineering systems, and "keeping the lights on" as the transformation of the American energy infrastructure proceeds is a fundamental engineering challenge involving both the physical aspects of the equipment and the cyber aspects of the controls, communications, and computers that run the system. The project develops new principles of cyber-physical engineering by focusing on instabilities of electric power networks that can cause blackouts. It proposes novel approaches to analyze these instabilities and to design cyber-physical control methods to monitor, detect, and mitigate them. The controls must perform robustly in the presence of variability and uncertainty in electric generation, loads, communications, and equipment status, and during abnormal states caused by natural faults or malicious attacks. The research produces cyber-physical engineering methodologies that specifically help to mitigate power system blackouts and more generally show the way forward in designing robust cyber-physical systems in environments characterized by rich dynamics and uncertainty. Education and outreach efforts involve students at high school, undergraduate, and graduate levels, as well as dissemination of results to the public and the engineering and applied science communities in industry, government and universities.

This project aims to develop a computational framework and a physical platform for enabling dense networks of micro-robotic swarms for medical applications. The approach relies on a new stochastic framework for design and analysis of dense networks, as well as new fabrication and characterization methods for building and understanding bacteria propelled micro-robotic swarms. This project enhances the CPS science beyond passive networks of millimeter-scale bio-implantable devices with active networks of micro-robotic swarms that could be more effective in combating various critical diseases with minimal impact on the human body. Three major research objectives are proposed in this project: 1) Statistical physics inspired approach to the modeling and analysis of dense networks of swarms: The theory envisioned for characterizing the dynamics of dense networks of swarms aims at achieving ?beyond Turing? computation via dense networks, designing autonomous reliable communication protocols for dense networks, and estimating and controlling their performance; 2) Fabrication and steering of swarms of bacteria propelled swimming micro-robots: Large numbers of both chemotactic and magnetotactic bacteria integrated micro-robotic bodies will be fabricated using self-assembly and micro/nano-fabrication methods. Chemotaxis and magnetotaxis will be respectively used as passive and active steering mechanisms for navigating the swarms of micro-robots in small spaces to perform specified tasks; 3) Characterization of the behavior and control of bacteria propelled micro-robotic swarms: To validate and fine tune the proposed computational models, the motion and behavior of single and large numbers of bacteria propelled micro-robots will be characterized using optical and other microscopy methods. Intellectual Merit: The research breakthrough proposed herein consists of building a new physical platform for micro-robotic swarms by using attached bacteria as on-board actuators and chemotaxis and magnetotaxis as passive and active steering control methods, and developing a new computational dense network framework for designing and analyzing such stochastic micro-robotic swarms. The statistical computational framework to be developed in this study will improve understanding of swarming behavior and control of large numbers of bacteria propelled micro-robots. This framework offers an integrated approach towards CPS design that is meant to operate under uncertainty conditions, yet be able to succeed in performing a specified task through self-organization and collective behavior. This bottom-top approach is meant to improve the theoretical foundations of the current computational models of CPS. Broader Impacts: The resulting computational framework and the physical platform could be adapted to a wide range of different stochastic dense network systems ranging from migration of cancer cell populations or dynamics of virus populations to immune system support and modeling. The proposed swarms of bacteria integrated micro-robots have potential future applications in health-care for the diagnosis of diseases and targeted drug delivery inside the stagnant or low velocity fluids of the human body or the medical diagnosis inside lab-on-a-chip microfluidic devices. Such health-care applications could improve the welfare of our society. To foster learning and training of next generation CPS workforce, the PIs plan to emphasize a cross-disciplinary approach to teaching topics that are usually offered in disjoint tracks. The PIs will integrate the CPS research activities in this study into their newly developed courses, and they will also teach one of these courses jointly. As a joint international educational activity, a three-day Summer School will be held alternately in US and Europe every year on various CPS topics related to our project. This will help building a strong international CPS community and training US and European students in CPS topics. The PIs will present the research results of this project to children, K-12 students, K-12 teachers, IEEE and ACM student members, and college students inside and outside of USA through public lectures. This project and the Sloan Foundation will support underrepresented and minority graduate students in the project. Moreover, underrepresented minority undergraduate students will be trained through the CMU ICES summer outreach program called The SURE Thing and the NSF REU program.

This project integrates digital microfluidics with thin-film photodetectors and control software to realize DNA target sensing using fluorescence. This cyberphysical vision is being realized through tight coupling between physical components, the microfluidic platform and miniaturized sensors, and cyber components, software for control, decision-making, and adaptation. Such a level of integration, decision, and controlled reconfigurability is a significant step forward in clinical diagnostics using digital microfluidic biochips. Topics being investigated include: (i) silicon-based digital microfluidics and integration of optical sensors; (ii) closed-loop operation and run-time optimization under software control; (iii) decision-tree architectures, adaptive reconfiguration, and error recovery. A complete testbed is being developed for nucleic acid identification on a fabricated chip with detection sites. Cyberphysical system integration will transform biochip use, in the same way as compilers and operating systems revolutionized computing, and design automation revolutionized chip design. Benefits to society include the potential to transform personalized medicine, home diagnostics, and portable diagnostics. Integration of digital microfluidics, optical sensing, and software control has the potential to create systems that can be used by any person, regardless of sample preparation skill. One example is the identification of bacterial DNA associated with bacterial blood infection (sepsis), which results in death if not diagnosed early (this is in the top 10 causes of death in the US). Students are being trained through a Senior Design course to understand the design

This NSF award provides support for a CPS Virtual Organization. The National Science Foundation established the Cyber-Physical Systems (CPS) program with the vision of developing a scientific and engineering foundation for routinely building cyber-enabled engineered systems in which cyber capability is deeply embedded at all scales, yet which remain safe, secure, and dependable -- "systems you can bet your life on." The CPS challenge spans essentially every engineering domain. It requires the integration of knowledge and engineering principles across many computational and engineering research disciplines (computing, networking, control, human interaction, learning theory, as well as mechanical, chemical, biomedical, and other engineering disciplines) to develop a "new CPS system science." Achieving such an ambitious goal is challenging. The objective of the CPS "virtual organization" (CPS-VO) project is to actively build and support the multidisciplinary community needed to underpin this new research discipline and enable international and interagency collaboration on CPS. In support of the CPS-VO, Vanderbilt University will work with the community to develop strategies and mechanisms to: (i) facilitate and foster interaction and exchange among CPS researchers across a broad range of institutions, programs and disciplines, (ii) enable sharing of knowledge generated by CPS research with the broader engineering and scientific communities, sharing and integrating experimental tools, platforms and simulators among researchers and stakeholders, (iii) facilitate and foster collaboration and information exchange between CPS researchers and industry and (iv) facilitate international collaboration on CPS research.

In many important situations, analytically predicting the behavior of physical systems is not possible. For example, the three dimensional nature of physical systems makes it provably impossible to express closed-form analytical solutions for even the simplest systems. This has made experimentation the primary modality for designing new cyber-physical systems (CPS). Since physical prototyping and experiments are typically costly and hard to conduct, "virtual experiments" in the form of modeling and simulation can dramatically accelerate innovation in CPS. Unfortunately, major technical challenges often impede the effectiveness of modeling and simulation. This project develops foundations and tools for overcoming these challenges. The project focuses on robotics as an important, archetypical class of CPS, and consists of four key tasks: 1) Compiling and analyzing a benchmark suite for modeling and simulating robots, 2) Developing a meta-theory for relating cyber-physical models, as well as tools and a test bed for robot modeling and simulation, 3) Validating the research results of the project using two state-of-the-art robot platforms that incorporate novel control technologies and will require novel programming techniques to fully realize their potential 4) Developing course materials incorporating the project's research results and test bed. With the aim of accelerating innovation in a wide range of domains including stroke rehabilitation and prosthetic limbs, the project is developing new control concepts and modeling and simulation technologies for robotics. In addition to new mathematical foundations, models, and validation methods, the project will also develop software tools and systematic methods for using them. The project trains four doctoral students; develops a new course on modeling and simulation for cyber-physical systems that balances both control and programming concepts; and includes an outreach component to the public and to minority-serving K-12 programs.

The electric grid in the United States has evolved over the past century from a series of small independent community-based systems to one of the largest and most complex cyber-physical systems today. However, the established conditions that made the electric grid an engineering marvel are being challenged by major changes, the most important being a worldwide effort to mitigate climate change by reducing carbon emissions. This research investigates key aspects of a computation and information foundation for future cyber-physical energy systems?the smart grids. The overall project objective is to support high penetrations of renewable energy sources, community based micro-grids, and the widespread use of electric cars and smart appliances. The research has three interconnected components that, collectively, address issues of computation architecture, information hierarchy, and experimental modeling and validation. On computation architecture, the framework based on cloud computing is investigated for the scalable, consistent, and secure operations of smart grids. The research aims to quantify fundamental design tradeoffs among scalability, data consistency, security, and trustworthiness for emerging applications of smart grids. On information hierarchy, temporal and spatial characteristics of information hierarchy are investigated with the goal of gaining a foundational understanding on how information should be partitioned, collected, distributed, compressed, and aggregated. The research also develops an open and scalable experimental platform (SmartGridLab) for empirical investigations and testing of algorithms and concepts developed in this project. SmartGridLab integrates the hardware testbed with a software simulator so that software virtual nodes can interact with physical nodes in the testbed. This research also includes a significant education component aimed at integrating frontier research with undergraduate and graduate curricula.