The objective of this research is to study the formal design and verification of advanced vehicle dynamics control systems. The approach is to consider the vehicle-driver-road system as a cyber-physical system (CPS) by focusing on three critical components: (i) the tire-road interaction; (ii) the driver-vehicle interaction; and (iii) the controller design and validation. Methods for quantifying and estimating the uncertainty of the road friction coefficient by using self-powered wireless sensors embedded in the tire are developed for considering tire-road interaction. Tools for real-time identification of nominal driver behavior and uncertainty bounds by using in-vehicle cameras and body wireless sensors are developed for considering driver-vehicle interaction. A predictive hybrid supervisory control scheme will guarantee that the vehicle performs safely for all possible uncertainty levels. In particular, for controller design and validation, the CPS autonomy level is continuously adapted as a function of human and environment conditions and their uncertainty bounds quantified by considering tire-road and driver-vehicle interaction. High confidence is critical in all human operated and supervised cyber-physical systems. These include environmental monitoring, telesurgery, power networks, and any transportation CPS. When human and environment uncertainty bounds can be predicted, safety can be robustly guaranteed by a proper controller design and validation. This avoids lengthy and expensive trial and error design procedures and drastically increases their confidence level. Graduate, undergraduate and underrepresented engineering students benefit from this project through classroom instruction, involvement in the research and substantial interaction with industrial partners from the fields of tires, vehicle active safety, and wireless sensors.

The objective of this research is to develop the scientific foundation for the quantitative analysis and design of control networks. Control networks are wireless substrates for industrial automation control, such as the WirelessHART and Honeywell's OneWireless, and have fundamental differences over their sensor network counterparts as they also include actuation and the physical dynamics. The approach of the project focuses on understanding cross-cutting interfaces between computing systems, control systems, sensor networks, and wireless communications using time-triggered architectures. The intellectual merit of this research is based on using time-triggered communication and computation as a unifying abstraction for understanding control networks. Time-triggered architectures enable the natural integration of communication, computation, and physical aspects of control networks as switched control systems. The time-triggered abstraction will serve for addressing the following interrelated themes: Optimal Schedules via Quantitative Automata, Quantitative Analysis and Design of Control Networks: Wireless Protocols for Optimal Control: Quantitative Trust Management for Control Networks. Various components of this research will be integrated into the PIs' RAVEN control network which is compatible with both WirelessHART and OneWireless specifications. This provides a direct path for this proposal to have immediate industrial impact. In order to increase the broader impact of this project, this project will launch the creation of a Masters' program in Embedded Systems, one of the first in the nation. The principle that guides the curriculum development of this novel program is a unified systems view of computing, communication, and control systems.

The objective of this research is to develop abstractions by which the controlled process and computation state in a cyber-physical system can both be expressed in a form that is useful for decision-making across real-time task scheduling and control actuation domains. The approach is to quantify the control degradation in terms of response time, thereby tying computer responsiveness to the controlled process performance and use such cost functions to effectively manage computational resources. Similarly, control strategies can be adjusted so as to be responsive to computational state. Unmanned aircraft will be used as vehicles to demonstrate our approach. The intellectual merit of this research is that it takes disparate fields, control and computation, and builds formal abstractions in both the computation-to-control and control-to-computation directions. These abstractions are grounded in terms of physical reality (e.g., time, fuel, energy) and encapsulate in a form comprehensible and meaningful to each domain, the relevant attributes of the other domain. This research is important because cyber-physical systems are playing an increasing role in all walks of life. It will allow design approaches to be systematic and efficient rather than ad hoc. It is based on a large body of our prior work that has begun to successfully bridge the representational and algorithmic gap that separates the control and computer science & engineering communities. Dissemination of results will be by means of courses in our universities, instructional materials, research and tutorial publications and industry collaboration (e.g., General Motors R&D). The plan is to hire minority/female students.

This proposed CPS project aims to enable intelligent telesurgery in which a surgeon, or a distributed team of surgeons, can work on tiny regions in the body with minimal access. The University of Washington will expand an existing open surgical robot testbed, and create a robust infrastructure for cyber-physical systems with which to extend traditional real-time control and teleoperation concepts by adding three new interfaces to the system: networking, intelligent robotics, and novel non-linear controllers. Intellectual Merit: This project aims to break new ground beyond teleoperation by adding advanced robotic functions. Equally robust and flexible networking, high-level interfaces, and novel controllers will be added to the existing sytsem. The resulting system will be an open architecture and a substrate upon which many cyber-physical system ideas and algorithms will be tested under realistic conditions. The platforms proven physical robustness will permit rigorous evaluation of results and the open interfaces will encourage collaboration and sharing of results. Broader Impacts: We expect the results to enable new research in multiple ways. First, the collaborators such as Johns Hopkins, U.C. Santa Cruz, and several foreign institutions will be able to remotely connect to new high level interfaces provided by this project. Second, for the first time a robust and completely open surgical telerobot will be available for research so that CPS researchers do not need to be limited to isolated toy problems but instead be able to prototype advanced surgical robotics techniques and evaluate them in realistic contexts including animal procedures.

The objective of this research is to develop abstractions by which the controlled process and computation state in a cyber-physical system can both be expressed in a form that is useful for decision-making across real-time task scheduling and control actuation domains. The approach is to quantify the control degradation in terms of response time, thereby tying computer responsiveness to the controlled process performance and use such cost functions to effectively manage computational resources. Similarly, control strategies can be adjusted so as to be responsive to computational state. Unmanned aircraft will be used as vehicles to demonstrate our approach. The intellectual merit of this research is that it takes disparate fields, control and computation, and builds formal abstractions in both the computation-to-control and control-to-computation directions. These abstractions are grounded in terms of physical reality (e.g., time, fuel, energy) and encapsulate in a form comprehensible and meaningful to each domain, the relevant attributes of the other domain. This research is important because cyber-physical systems are playing an increasing role in all walks of life. It will allow design approaches to be systematic and efficient rather than ad hoc. It is based on a large body of our prior work that has begun to successfully bridge the representational and algorithmic gap that separates the control and computer science & engineering communities. Dissemination of results will be by means of courses in our universities, instructional materials, research and tutorial publications and industry collaboration (e.g., General Motors R&D). The plan is to hire minority/female students.

The objective of this research is the development of novel control architectures and computationally efficient controller design algorithms for distributed cyber-physical systems with decentralized information infrastructures and limited communication capabilities. Active safety in Intelligent Transportation Systems will be the focus cyber-physical application. For the successful development and deployment of cooperative active safety systems, it is critical to develop theory and techniques to design algorithms with guaranteed safety properties and predictable behavior. The approach is to develop a new methodology for the design of communicating distributed hybrid controllers by integrating in a novel manner discrete-event controller design and hybrid controller design and optimization. The methodology to be developed will exploit problem decomposition and will have significant technological impact for a large class of cyber-physical systems that share features of modularity in system representation, partial information, and limited communication. The focus on distributed control strategies with limited communication among agents is addressing an important gap in existing control theories for cyber-physical systems. The approach will mitigate the computational limitations of existing approaches to control design for hybrid systems. Given the focus on cooperative active safety in Intelligent Transportation Systems, the results of this effort will have significant societal impact in terms of increased traffic safety and reduced number and severity of accidents. The broader impacts of this proposal also include involvement of high-school and undergraduate students and curriculum development by incorporating results of research into existing courses on cyber-physical systems.