Designing semi-autonomous networks of miniature robots for inspection of bridges and other large civil infrastructure According to the U.S. Department of Transportation, the United States has 605102 bridges of which 64% are 30 years or older and 11% are structurally deficient. Visual inspection is a standard procedure to identify structural flaws and possibly predict the imminent collapse of a bridge and determine effective precautionary measures and repairs. Experts who carry out this difficult task must travel to the location of the bridge and spend many hours assessing the integrity of the structure. The proposal is to establish (i) new design and performance analysis principles and (ii) technologies for creating a self-organizing network of small robots to aid visual inspection of bridges and other large civilian infrastructure. The main idea is to use such a network to aid the experts in remotely and routinely inspecting complex structures, such as the typical girder assemblage that supports the decks of a suspension bridge. The robots will use wireless information exchange to autonomously coordinate and cooperate in the inspection of pre-specified portions of a bridge. At the end of the task, or whenever possible, they will report images as well as other key measurements back to the experts for further evaluation. Common systems to aid visual inspection rely either on stationary cameras with restricted field of view, or tethered ground vehicles. Unmanned aerial vehicles cannot access constricted spaces and must be tethered due to power requirements and the need for uninterrupted communication to support the continual safety critical supervision by one or more operators. In contrast, the system proposed here would be able to access tight spaces, operate under any weather, and execute tasks autonomously over long periods of time. The fact that the proposed framework allows remote expert supervision will reduce cost and time between inspections. The added flexibility as well as the increased regularity and longevity of the deployments will improve the detection and diagnosis of problems, which will increase safety and support effective preventive maintenance. This project will be carried out by a multidisciplinary team specialized in diverse areas of cyber-physical systems and robotics, such as locomotion, network science, modeling, control systems, hardware sensor design and optimization. It involves collaboration between faculty from the University of Maryland (UMD) and Resensys, which specializes in remote bridge monitoring. The proposed system will be tested in collaboration with the Maryland State Highway Administration, which will also provide feedback and expertise throughout the project. This project includes concrete plans to involve undergraduate students throughout its duration. The investigators, who have an established record of STEM outreach and education, will also leverage on exiting programs and resources at the Maryland Robotics Center to support this initiative and carry out outreach activities. In order to make student participation more productive and educational, the structure of the proposed system conforms to a hardware architecture adopted at UMD and many other schools for the teaching of undergraduate courses relevant to cyber-physical systems and robotics. This grant will support research on fundamental principles and design of robotic and cyber-physical systems. It will focus on algorithm design for control and coordination, network science, performance evaluation, microfabrication and system integration to address the following challenges: (i) Devise new locomotion and adhesion principles to support mobility within steel and concrete girder structures. (ii) Investigate the design of location estimators, omniscience and coordination algorithms that are provably optimal, subject to power and computational constraints. (iii) Methods to design and analyze the performance of energy-efficient communication protocols to support robot coordination and localization in the presence of the severe propagation barriers caused by metal and concrete structures of a bridge.

Enhanced Structural Health Monitoring of Civil Infrastructure Systems by Observing and Controlling Loads using a Cyber-Physical System Framework The economic prosperity of the nation is dependent on vast networks of civil infrastructure systems. Unfortunately, large fractions of these infrastructure systems are rapidly approaching the end of their intended design lives. The national network of highway bridges is especially vulnerable to age-based deterioration as revealed by recent catastrophic bridge collapses in the United States. Two major bottlenecks currently exist that severely limit the effectiveness of existing bridge health management methods. First, the causal relationship between repeated truck loading and long-term structural deterioration is not well understood. Second, current management methods are reliant on visual inspections which only provide qualitative information regarding bridge health and introduce subjectivity in post-inspection decision making. This project aims to resolve these major bottlenecks by advancing a cyber-physical system (CPS) designed to monitor the health of highway bridges, control the loads imposed on bridges by heavy trucks, and provide visual inspectors with quantitative information for data-driven bridge health assessments. The CPS framework created will have enormous impact on the national economy by enhancing public safety while dramatically improving the cost-effectiveness of infrastructure management methods. The project will also create publically available graduate-level course curricula focused on CPS technology and engages inner-city middle-school students from underrepresented groups to prepare them to pursue careers in the science, technology, engineering, and mathematics (STEM) fields. The overarching goal of the research project is to create a scalable and robust CPS framework for the observation and control of mobile agents that asynchronously and transiently interact with a stationary physical system. While this class of problem is found throughout many engineering disciplines, the project focuses on the health management of highway bridges. The mobile agents relevant to bridge health are the trucks that load and introduce long-term damage in the bridge and inspectors who visually inspect the bridge. The task of devising a robust CPS framework will be challenged by the highly transient nature of the agents involved. Specifically, the compressed time of interaction between the truck and bridge results in tight time constraints on observation, quantification and control of the truck's loading. The project will rely on ad-hoc wireless communications to seamlessly integrate sensors embedded in the mobile agents (trucks and inspectors) with wireless sensors installed on the bridge and with servers dedicated to cloud-based analytics located on the Internet. The project will design the CPS framework to quantify in real-time truck loads based on sensor data streaming into the CPS framework. A distributed computing architecture will be created for the CPS framework to automate the decomposition of computational tasks in order to dramatically improve the speed and efficiency of the framework's data processing capabilities. Finally, the CPS framework will establish ad-hoc feedback control of the mobile agents in order to control mobile agent-stationary system interactions. In particular, feedback control of an instrumented truck allows the CPS framework to control the loads imposed on the bridge for improved health assessments. The CPS framework will be further extended to control visual inspection processes by providing inspectors with recommend inspection actions based on rigorous analysis of collected sensor data. The intellectual significance of the CPS framework is that it observes and controls truck loads on highway bridges for the first time while creating an entirely new data-driven paradigm for more accurate health assessment of infrastructure systems.

This project represents a cross-disciplinary collaborative research effort on developing rigorous, closed-loop approaches for designing, simulating, and verifying medical devices. The work will open fundamental new approaches for radically accelerating the pace of medical device innovation, especially in the sphere of cardiac-device design. Specific attention will be devoted to developing advanced formal methods-based approaches for analyzing controller designs for safety and effectiveness; and devising methods for expediting regulatory and other third-party reviews of device designs. The project team includes members with research backgrounds in computer science, electrical engineering, biophysics, and cardiology; the PIs will use a coordinated approach that balances theoretical, experimental and practical concerns to yield results that are intended to transform the practice of device design while also facilitating the translation of new cardiac therapies into practice. The proposed effort will lead to significant advances in the state of the art for system verification and cardiac therapies based on the use of formal methods and closed-loop control and verification. The animating vision for the work is to enable the development of a true in silico design methodology for medical devices that can be used to speed the development of new devices and to provide greater assurance that their behaviors match designers' intentions, and to pass regulatory muster more quickly so that they can be used on patients needing their care. The scientific work being proposed will serve this vision by providing mathematically robust techniques for analyzing and verifying the behavior of medical devices, for modeling and simulating heart dynamics, and for conducting closed-loop verification of proposed therapeutic approaches. The acceleration in medical device innovation achievable as a result of the proposed research will also have long-term and sustained societal benefits, as better diagnostic and therapeutic technologies enter into the practice of medicine more quickly. It will also yield a collection of tools and techniques that will be applicable in the design of other types of devices. Finally, it will contribute to the development of human resources and the further inclusion of under-represented groups via its extensive education and outreach programs, including intensive workshop experiences for undergraduates

This project represents a cross-disciplinary collaborative research effort on developing rigorous, closed-loop approaches for designing, simulating, and verifying medical devices. The work will open fundamental new approaches for radically accelerating the pace of medical device innovation, especially in the sphere of cardiac-device design. Specific attention will be devoted to developing advanced formal methods-based approaches for analyzing controller designs for safety and effectiveness; and devising methods for expediting regulatory and other third-party reviews of device designs. The project team includes members with research backgrounds in computer science, electrical engineering, biophysics, and cardiology; the PIs will use a coordinated approach that balances theoretical, experimental and practical concerns to yield results that are intended to transform the practice of device design while also facilitating the translation of new cardiac therapies into practice. The proposed effort will lead to significant advances in the state of the art for system verification and cardiac therapies based on the use of formal methods and closed-loop control and verification. The animating vision for the work is to enable the development of a true in silico design methodology for medical devices that can be used to speed the development of new devices and to provide greater assurance that their behaviors match designers' intentions, and to pass regulatory muster more quickly so that they can be used on patients needing their care. The scientific work being proposed will serve this vision by providing mathematically robust techniques for analyzing and verifying the behavior of medical devices, for modeling and simulating heart dynamics, and for conducting closed-loop verification of proposed therapeutic approaches. The acceleration in medical device innovation achievable as a result of the proposed research will also have long-term and sustained societal benefits, as better diagnostic and therapeutic technologies enter into the practice of medicine more quickly. It will also yield a collection of tools and techniques that will be applicable in the design of other types of devices. Finally, it will contribute to the development of human resources and the further inclusion of under-represented groups via its extensive education and outreach programs, including intensive workshop experiences for undergraduates.

The evolution of manufacturing systems from loose collections of cyber and physical components into true cyber-physical systems has expanded the opportunities for cyber-attacks against manufacturing. To ensure the continued production of high-quality parts in this new environment requires the development of novel security tools that transcend both the cyber and physical worlds. Potential cyber-attacks can cause undetectable changes in a manufacturing system that can adversely affect the product's design intent, performance, quality, or perceived quality. The result of this could be financially devastating by delaying a product's launch, ruining equipment, increasing warranty costs, or losing customer trust. More importantly, these attacks pose a risk to human safety, as operators and consumers could be using faulty equipment/products. New methods for detecting and diagnosing cyber-physical attacks will be studied and evaluated through our established industrial partners. The expected results of this project will contribute significantly in further securing our nation's manufacturing infrastructure. This project establishes a new vision for manufacturing cyber-security based upon modeling and understanding the correlation between cyber events that occur in a product/process development-cycle and the physical data generated during manufacturing. Specifically, the proposed research will take advantage of this correlation to characterize the relationships between cyber-attacks, process data, product quality observations, and side-channel impacts for the purpose of attack detection and diagnosis. These process characterizations will be coupled with new manufacturing specific cyber-attack taxonomies to provide a comprehensive understanding of attack surfaces for advanced manufacturing systems and their cyber-physical manifestations in manufacturing processes. This is a fundamental missing element in the manufacturing cyber-security body of knowledge. Finally, new forensic techniques, based on constraint optimization and machine learning, will be researched to differentiate process changes indicative of cyber-attacks from common variations in manufacturing due to inherent system variability.

Title: CPS: Breakthrough: Development of Novel Architectures for Control and Diagnosis of Safety-Critical Complex Cyber-Physical Systems This project is developing novel architectures for control and diagnosis of complex cyber-physical systems subject to stringent performance requirements in terms of safety, resilience, and adaptivity. These ever-increasing demands necessitate the use of formal model-based approaches to synthesize provably-correct feedback controllers. The intellectual merit of this research lies in a novel combination of techniques from the fields of dynamical systems, discrete event systems, reactive synthesis, and graph theory, together with new advancements in terms of abstraction techniques, computationally efficient synthesis of control and diagnosis strategies that support distributed implementations, and synthesis of acquisition of information and communication strategies. The project's broader significance and importance are demonstrated by the expected improvement of the safety, resilience, and performance of complex cyber-physical systems in critical infrastructures as well as the efficiency with which they are designed and certified. The original approach being developed is based on the combination of multi-resolution abstraction graphs for building discrete models of the underlying cyber-physical system with reactive synthesis techniques that exploit a representation of the solution space in terms of a finite structure called a decentralized bipartite transition system. The concepts of abstraction graph and decentralized bipartite transition system are novel and open new avenues of investigation with significant potential to the formal synthesis of safe, resilient, and adaptive controllers. This methodology naturally results in a set of decentralized and asynchronous controllers and diagnosers, which ensures greater resilience and adaptivity. Overall, this research will significantly impact the Science of Cyber-Physical Systems and the Engineering of Cyber-Physical Systems.

Driven by both civilian and military applications, such as coordinated surveillance, search and rescue, underwater or space exploration, manipulation in hazardous environments, and rapid emergency response, cooperative actions by teams of robots has emerged as an important research area. However, the coordination strategies for such robot teams are still developed to a great extent by trial-and-error processes. Hence, the strategies cannot guarantee mission success. This award supports fundamental research to provide a provably correct formal design theory of multi-robot systems that guarantees mission success. Furthermore, results from the research can be extended to the design of more general cyber-physical systems (CPSs) consisting of distributed and coordinated subsystems, such as the national power grid, ground/air traffic networks, and manufacturing systems. These CPSs are critical components of the national civil infrastructure that must operate reliably to ensure public safety. The multidisciplinary approach taken will help broaden participation of underrepresented groups in research and positively impact engineering education. Focusing on multi-robot teams, the goal of the research is to build foundations for a provably correct formal design theory for CPSs. This design theory will guarantee a given global performance of multi-robot teams through designing local coordination rules and control laws. The basic idea is to decompose the team mission into individual subtasks such that the design can be reduced to a local synthesis problem for individual robots. Multidisciplinary approaches combining hybrid systems, supervisory control, regular inference and model checking will be utilized to achieve this goal. The developed theory will enable robots in the team to cooperatively learn their individual roles in a mission, and then automatically synthesize local supervisors to fulfill their subtasks. A salient feature of this method lies on its ability to handle environmental uncertainties and unmodeled dynamics, as there is no need for an explicit model of the transition dynamics of each agent/robot and their interactions with the environment. In addition, the design is online and reactive, enabling the robot team to adapt to changing environments and dynamic tasking. The derived theory will be implemented as software tools and will be demonstrated through real robotic systems consisting of unmanned ground and aerial vehicles in unstructured urban/rural areas.

Driven by both civilian and military applications, such as coordinated surveillance, search and rescue, underwater or space exploration, manipulation in hazardous environments, and rapid emergency response, cooperative actions by teams of robots has emerged as an important research area. However, the coordination strategies for such robot teams are still developed to a great extent by trial-and-error processes. Hence, the strategies cannot guarantee mission success. This award supports fundamental research to provide a provably correct formal design theory of multi-robot systems that guarantees mission success. Furthermore, results from the research can be extended to the design of more general cyber-physical systems (CPSs) consisting of distributed and coordinated subsystems, such as the national power grid, ground/air traffic networks, and manufacturing systems. These CPSs are critical components of the national civil infrastructure that must operate reliably to ensure public safety. The multidisciplinary approach taken will help broaden participation of underrepresented groups in research and positively impact engineering education. Focusing on multi-robot teams, the goal of the research is to build foundations for a provably correct formal design theory for CPSs. This design theory will guarantee a given global performance of multi-robot teams through designing local coordination rules and control laws. The basic idea is to decompose the team mission into individual subtasks such that the design can be reduced to a local synthesis problem for individual robots. Multidisciplinary approaches combining hybrid systems, supervisory control, regular inference and model checking will be utilized to achieve this goal. The developed theory will enable robots in the team to cooperatively learn their individual roles in a mission, and then automatically synthesize local supervisors to fulfill their subtasks. A salient feature of this method lies on its ability to handle environmental uncertainties and unmodeled dynamics, as there is no need for an explicit model of the transition dynamics of each agent/robot and their interactions with the environment. In addition, the design is online and reactive, enabling the robot team to adapt to changing environments and dynamic tasking. The derived theory will be implemented as software tools and will be demonstrated through real robotic systems consisting of unmanned ground and aerial vehicles in unstructured urban/rural areas.

Trustworthy operation of next-generation complex power grid critical infrastructures requires mathematical and practical verification solutions to guarantee the correct infrastructural functionalities. This project develops the foundations of theoretical modeling, synthesis and real-world deployment of a formal and scalable controller code verifier for programmable logic controllers (PLCs) in cyber-physical settings. PLCs are widely used for control automation in industrial control systems. A PLC is typically connected to an engineering workstation where engineers develop the control logic to process the input values from sensors and issue control commands to actuators. The project focuses on protecting infrastructures against malicious control injection attacks on PLCs, such as Stuxnet, that inject malicious code on the device to drive the underlying physical platform to an unsafe state. The broader impact of this proposal is highly significant. It offers potential for real-time security for critical infrastructure systems covering sectors such as energy and manufacturing. The project's intellectual merit is in providing a mathematical and practical verification framework for cyber-physical systems through integration of offline formal methods, online monitoring solutions, and power systems analysis. Offline formal methods do not scale for large-scale platforms due to their exhaustive safety analysis of all possible system states, while online monitoring often reports findings too late for preventative action. This project takes a hybrid approach that dynamically predicts the possible next security incidents and reports to operators before an unsafe state is encountered, allowing time for response. The broader impact of this project is in providing practical mathematical analysis capabilities for general cyber-physical safety-critical infrastructure with potential direct impact on our national security. The research outcomes are integrated into education modules for graduate, undergraduate, and K-12 classrooms.

Title: Efficient Traffic Management: A Formal Methods Approach The objective of this project is to develop a formal methods approach to traffic management. Formal methods is an area of computer science that develops efficient techniques for proving the correct operation of systems, such as computer programs and digital circuits, and for designing systems that are correct by construction. This project extends this formalism to traffic networks where correctness specifications include eliminating congestion, ensuring that the freeway throughput remains over a minimum threshold, that queues are always eventually emptied, etc. The task is then to design signal timing and ramp metering strategies to meet such specifications. To accomplish this task, the project takes advantage of the inherent structure of existing, validated mathematical models of traffic flow and develops computationally efficient design techniques. The results are tested with real traffic data from the Interstate 210 travel corridor in Southern California. The educational component of the project includes course development on modeling and control of traffic networks, featuring in particular the formal methods approach of this project, and organizing workshops to train traffic engineers and operation practitioners on the use of software tools and methodologies of the project. To meet rich control objectives expressed using temporal logic, the project exploits the piecewise affine nature of existing, validated traffic models, and derives efficient finite state abstractions that form the basis of correct-by-construction control synthesis. To ensure scalability, the project further takes advantage of inherent monotonicity properties and decomposibility into sparsely connected subsystems. The first research task is to develop a design framework for signal timing and ramp metering strategies for signalized intersections and freeway traffic control. The second task is the coordinated control of freeway onramps and nearby signalized intersections to address situations such as a freeway demand surge after a sporting event, or an accident on the freeway when signal settings must be adjusted to favor a detour route. The third task is to pursue designs that exploit the statistics of demand for probabilistic correctness guarantees, as well as designs that incorporate optimality requirements, such as minimizing travel time. Validation of the results is pursued with high-fidelity simulation models calibrated using traffic data from the Interstate 210 travel corridor.